HCR20N Series — Hydraulic Cylinder Rod End Bearing
HCR20N
Hydraulic Rod End Bearing
Metric sizes · Right-hand thread · C45 forged or GS400 housing · DIN 71412 lubrication
13
Available Sizes
-50° to +150°C
Operating Range
Full Spec Range
Search by spec.
| Part No. | Size | G | A | B | M | F | J | GL | L | Clearance | M1 | Dynamic | Static | K | Tilt | Weight | Qty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR20N-20 | 20 | M16x1,5 | 56 | 16 | 19 | 50 | 25 | 17 | 80 | 30-82 | 17 | 30 | 81.1 | 46 | 9 | 450 g | ||
| HCR20N-25 | 25 | M16x1,5 | 56 | 20 | 23 | 50 | 25 | 17 | 80 | 37-100 | 21 | 48 | 72 | 46 | 7 | 490 g | ||
| HCR20N-30 | 30 | M22x1,5 | 64 | 22 | 28 | 60 | 32 | 23 | 94 | 37-100 | 26 | 62 | 106 | 50 | 6 | 760 g | ||
| HCR20N-35 | 35 | M28x1,5 | 78 | 25 | 30 | 70 | 40 | 29 | 112 | 37-100 | 28 | 80 | 153 | 66 | 6 | 1260 g | ||
| HCR20N-40 | 40 | M35x1,5 | 94 | 28 | 35 | 85 | 49 | 36 | 135 | 43-120 | 33 | 100 | 250 | 76 | 7 | 2150 g | ||
| HCR20N-50 | 50 | M45x1,5 | 116 | 35 | 40 | 105 | 61 | 46 | 168 | 43-120 | 37 | 156 | 365 | 90 | 6 | 3800 g | ||
| HCR20N-60 | 60 | M58x1,5 | 130 | 44 | 50 | 130 | 75 | 59 | 200 | 43-120 | 46 | 245 | 400 | 120 | 6 | 6200 g | ||
| HCR20N-70 | 70 | M65x1,5 | 154 | 49 | 55 | 150 | 86 | 66 | 232 | 55-142 | 51 | 315 | 540 | 130 | 6 | 9830 g | ||
| HCR20N-80 | 80 | M80x2 | 176 | 55 | 60 | 170 | 105 | 81 | 265 | 55-142 | 55 | 400 | 670 | 160 | 6 | 13970 g | ||
| HCR20N-90 | 90 | M100x2 | 206 | 60 | 65 | 210 | 124 | 101 | 322 | 55-142 | 60 | 490 | 980 | 180 | 5 | 23500 g | ||
| HCR20N-100 | 100 | M110x2 | 231 | 70 | 70 | 235 | 138 | 111 | 360 | 65-165 | 65 | 610 | 1120 | 200 | 7 | 32000 g | ||
| HCR20N-110 | 110 | M120x3 | 266 | 70 | 80 | 265 | 152 | 125 | 407 | 65-165 | 74 | 655 | 1700 | 220 | 6 | 41000 g | ||
| HCR20N-120 | 120 | M130x3 | 340 | 85 | 90 | 310 | 172 | 135 | 490 | 65-165 | 84 | 950 | 2900 | 257 | 6 | 72000 g |
Construction
Technical Spec.
- Bearing shell and inner ring: 100Cr6 / AISI 52100 bearing steel, hardened and ground, with phosphate and molybdenum-disulfide surface treatment.
- Housing: Sizes 20–80 use forged, heat-treated C45 / AISI 1045 steel; sizes 90–120 use GS400 nodular cast iron.
- Lubrication: Hydraulic grease nipple to DIN 71412 for service access during the operating life.
- Temperature range: -50°C to +150°C under the stated material and lubrication configuration.
Ordering Notes
Application Notes
- Confirm the right-hand thread, thread pitch and cylinder-side mounting envelope before ordering.
- Review dynamic and static load ratings together with side load, cycle frequency and lubrication access.
- For a quotation, include the required size rows and the target hydraulic-cylinder geometry.