Hydraulic-Cylinder Linkages
Use the published HCR12CE dimensions and mounting geometry to review cylinder-side linkage fit.
Size 110 / M90x3 thread / 235 mm outer diameter / 364 mm lengthROD END / HEIM JOINT
HCR12CE-110 Hydraulic Rod End Bearing, 110 mm Size
Part No.: HCR12CE-110
· Male & female version available
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Size 110 mm
Thread pitch M90x3
Diameter 125 mm
Dynamic load 655 kN
Static load 1200 kN
Tilt angle 4°
Bearing Shell
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
Inner Ring
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
Hydraulic Rod End Bearing HCR12CE Product Overview
HCR12CE-110 is a metric hydraulic-cylinder rod end bearing for larger cylinder-side linkage assemblies. It combines a GS400 nodular cast iron housing with a bearing shell and inner ring made from 100Cr6 / AISI 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment. It uses a right-hand M90x3 thread.
The size-110 configuration has a 235 mm outer diameter, 110 mm inner ring width, 88 mm bearing width, 235 mm medium length, 125 mm diameter, 106 mm thread length, 364 mm overall length. Published performance values are 65-165 μm internal clearance, 655 kN dynamic load rating, 1200 kN static load rating, 190 mm collar diameter, 4° tilt angle, 710 Nm torque, and approximately 32000 g weight.
Hydraulic grease nipple to DIN 71412. The stated operating range is -50°C to +150°C. Confirm the cylinder geometry, side-load condition, clearance, lubrication access, and final material requirements against the HCR12CE specification before production release.
Size Chart
Hydraulic Rod End Bearing HCR12CE Series — Full Size Range
All available sizes in the Hydraulic Rod End Bearing HCR12CE series. Can’t find your size? Contact us for custom dimensions.
| Part no. | [D] Size | [G] Thread pitch | [A] Outer diameter (mm) | [B] Inner ring width (mm) | [M] Bearing width (mm) | [F] Medium length (mm) | [J] Diameter (mm) | [GL] Thread length (mm) | [L] Length (mm) | Internal clearance (μm) | [M1] Width (mm) | Dynamic load rating (kN) | Static load rating (kN) | [K] Collar diameter (mm) | Tilt angle (°) | Torque (Nm) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR12CE-12 | 12 | M12x1,25 | 32 | 12 | 11 | 38 | 16 | 17 | 54 | 23-68 | 15 | 10.8 | 24.5 | 32 | 4 | 6 | 110 |
| HCR12CE-16 | 16 | M14x1,5 | 40 | 16 | 13 | 44 | 21 | 19 | 64 | 30-82 | 15 | 17.6 | 36.5 | 40 | 4 | 10 | 200 |
| HCR12CE-20 | 20 | M16x1,5 | 47 | 20 | 17 | 52 | 25 | 23 | 77 | 30-82 | 19 | 30 | 48 | 47 | 4 | 25 | 350 |
| HCR12CE-25 | 25 | M20x1,5 | 58 | 25 | 22 | 65 | 30 | 29 | 96 | 37-100 | 19 | 48 | 78 | 54 | 4 | 25 | 620 |
| HCR12CE-32 | 32 | M27x2 | 71 | 32 | 28 | 80 | 38 | 37 | 118 | 37-100 | 22 | 67 | 114 | 66 | 4 | 49 | 1150 |
| HCR12CE-40 | 40 | M33x2 | 90 | 40 | 33 | 97 | 47 | 46 | 146 | 43-120 | 26 | 100 | 204 | 80 | 4 | 49 | 2180 |
| HCR12CE-50 | 50 | M42x2 | 109 | 50 | 41 | 120 | 58 | 57 | 179 | 43-120 | 32 | 156 | 310 | 96 | 4 | 86 | 3960 |
| HCR12CE-63 | 63 | M48x2 | 136 | 63 | 53 | 140 | 70 | 64 | 213 | 55-142 | 38 | 255 | 430 | 114 | 4 | 210 | 6800 |
| HCR12CE-70 | 70 | M56x2 | 155 | 70 | 57 | 160 | 80 | 76 | 245 | 55-142 | 42 | 315 | 540 | 135 | 4 | 210 | 9600 |
| HCR12CE-80 | 80 | M64x3 | 170 | 80 | 67 | 180 | 90 | 86 | 270 | 55-142 | 48 | 400 | 695 | 148 | 4 | 410 | 13000 |
| HCR12CE-90 | 90 | M72x3 | 185 | 90 | 72 | 195 | 100 | 91 | 296 | 55-142 | 52 | 490 | 750 | 160 | 4 | 410 | 19100 |
| HCR12CE-100 | 100 | M80x3 | 211 | 100 | 85 | 210 | 110 | 96 | 322 | 65-165 | 62 | 610 | 1060 | 178 | 4 | 710 | 25000 |
| HCR12CE-110 | 110 | M90x3 | 235 | 110 | 88 | 235 | 125 | 106 | 364 | 65-165 | 62 | 655 | 1200 | 190 | 4 | 710 | 32000 |
| HCR12CE-125 | 125 | M100x3 | 265 | 125 | 103 | 260 | 135 | 113 | 406.5 | 65-165 | 72 | 950 | 1430 | 200 | 4 | 710 | 46000 |
| HCR12CE-160 | 160 | M125x4 | 326 | 160 | 130 | 310 | 165 | 126 | 488 | 65-192 | 82 | 1370 | 2200 | 250 | 4 | 710 | 82500 |
| HCR12CE-200 | 200 | M160x4 | 418 | 200 | 162 | 390 | 215 | 161 | 620 | 65-192 | 102 | 2120 | 3650 | 320 | 4 | 1500 | 168000 |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where Hydraulic Rod End Bearing HCR12CE Rod Ends Are Used
Related Products
All Products →More from the Hydraulic Rod End Bearing HCR12CE Series
Get a Quote
Request a Quote for the Hydraulic Rod End Bearing HCR12CE Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
Hydraulic Rod End Bearing HCR12CE Frequently Asked Questions
What is the HCR12CE series?
HCR12CE is a metric hydraulic-cylinder rod end bearing series with published dimensional, clearance, load and ordering data.
Which HCR12CE sizes are published?
The published HCR12CE specification table contains 16 sizes in the listed range.
What material is used for HCR12CE?
Bearing shell and inner ring: 100Cr6 / AISI 52100 bearing steel, hardened and ground, phosphate and molybdenum-disulfide treated. Housing: forged, heat-treated C45 / AISI 1045 steel in sizes 12–63; GS400 nodular cast iron in larger sizes.
How is HCR12CE lubricated?
Size 12 is not regreasable; sizes 16–200 use a DIN 71412 hydraulic grease nipple.
What temperature range is listed for HCR12CE?
The HCR12CE page lists an operating range of -50°C to +150°C under the stated material and lubrication configuration.
What should I provide for a HCR12CE quotation?
Provide the required size, cylinder-side mounting geometry or drawing, duty-cycle information and any lubrication or material requirements.