related-product-inchHBT10-15.00 Turnbuckle Hex Bar
TURNBUCKLE HEX BAR Product Overview
HBT10-15.00 is a 5/8-18 hex bar turnbuckle with 0.875″ hex across flats and 15.00″ total body length. Both ends are female-threaded (one RH, one LH) to accept rod ends or ball joints.
The HBT series hex bar turnbuckle is a female-female adjuster: thread one rod end into the right-hand end and another into the left-hand end. Rotating the hex body with a wrench extends or shortens the assembly in fine increments. Used for wheel alignment adjustment, suspension geometry tuning, steering tie rods, and any application requiring precise, tool-accessible length adjustment. Carbon steel, silver zinc plated.
All HBT10 sizes use 5/8-18 thread and 0.875″ hex. Lengths from 2″ to 26″ available across the series. Metric thread and special hex sizes available in volume. For single-end female adjustment, see the LBA linkage adjuster series.
TURNBUCKLE HEX BAR Series — Full Size Range
All available sizes in the TURNBUCKLE HEX BAR series. Can’t find your size? Contact us for custom dimensions.
| Part Number | Thread | Thread Length | Part Length | Hex Size |
|---|---|---|---|---|
| HBT3-2.00 | 10-32 | 0.875 | 2 | 0.375 |
| HBT3-2.75 | 10-32 | 1 | 2.75 | 0.375 |
| HBT3-3.50 | 10-32 | 1 | 3.5 | 0.375 |
| HBT3-4.25 | 10-32 | 1 | 4.25 | 0.375 |
| HBT3-5.00 | 10-32 | 1 | 5 | 0.375 |
| HBT3-5.75 | 10-32 | 1 | 5.75 | 0.375 |
| HBT3-6.50 | 10-32 | 1 | 6.5 | 0.375 |
| HBT3-7.25 | 10-32 | 1 | 7.25 | 0.375 |
| HBT3-8.00 | 10-32 | 1 | 8 | 0.375 |
| HBT3-8.75 | 10-32 | 1 | 8.75 | 0.375 |
| HBT3-9.50 | 10-32 | 1 | 9.5 | 0.375 |
| HBT3-10.25 | 10-32 | 1 | 10.25 | 0.375 |
| HBT3-11.00 | 10-32 | 1 | 11 | 0.375 |
| HBT3-11.75 | 10-32 | 1 | 11.75 | 0.375 |
| HBT3-12.50 | 10-32 | 1 | 12.5 | 0.375 |
| HBT3-13.25 | 10-32 | 1 | 13.25 | 0.375 |
| HBT3-14.00 | 10-32 | 1 | 14 | 0.375 |
| HBT3-14.75 | 10-32 | 1 | 14.75 | 0.375 |
| HBT3-15.50 | 10-32 | 1 | 15.5 | 0.375 |
| HBT3-16.25 | 10-32 | 1 | 16.25 | 0.375 |
| HBT3-17.00 | 10-32 | 1 | 17 | 0.375 |
| HBT3-17.75 | 10-32 | 1 | 17.75 | 0.375 |
| HBT4-3.00 | 1/4-28 | 1.25 | 3 | 0.438 |
| HBT4-4.00 | 1/4-28 | 1.25 | 4 | 0.438 |
| HBT4-5.00 | 1/4-28 | 1.25 | 5 | 0.438 |
| HBT4-6.00 | 1/4-28 | 1.25 | 6 | 0.438 |
| HBT4-7.00 | 1/4-28 | 1.25 | 7 | 0.438 |
| HBT4-8.00 | 1/4-28 | 1.25 | 8 | 0.438 |
| HBT4-9.00 | 1/4-28 | 1.25 | 9 | 0.438 |
| HBT4-10.00 | 1/4-28 | 1.25 | 10 | 0.438 |
| HBT4-11.00 | 1/4-28 | 1.25 | 11 | 0.438 |
| HBT4-12.00 | 1/4-28 | 1.25 | 12 | 0.438 |
| HBT4-13.00 | 1/4-28 | 1.25 | 13 | 0.438 |
| HBT4-14.00 | 1/4-28 | 1.25 | 14 | 0.438 |
| HBT4-15.00 | 1/4-28 | 1.25 | 15 | 0.438 |
| HBT4-16.00 | 1/4-28 | 1.25 | 16 | 0.438 |
| HBT4-17.00 | 1/4-28 | 1.25 | 17 | 0.438 |
| HBT4-18.00 | 1/4-28 | 1.25 | 18 | 0.438 |
| HBT4-19.00 | 1/4-28 | 1.25 | 19 | 0.438 |
| HBT4-20.00 | 1/4-28 | 1.25 | 20 | 0.438 |
| HBT4-21.00 | 1/4-28 | 1.25 | 21 | 0.438 |
| HBT4-22.00 | 1/4-28 | 1.25 | 22 | 0.438 |
| HBT4-23.00 | 1/4-28 | 1.25 | 23 | 0.438 |
| HBT4-24.00 | 1/4-28 | 1.25 | 24 | 0.438 |
| HBT5-3.00 | 5/16-24 | 1.375 | 3 | 0.5 |
| HBT5-4.00 | 5/16-24 | 1.5 | 4 | 0.5 |
| HBT5-5.00 | 5/16-24 | 1.5 | 5 | 0.5 |
| HBT5-6.00 | 5/16-24 | 1.5 | 6 | 0.5 |
| HBT5-7.00 | 5/16-24 | 1.5 | 7 | 0.5 |
| HBT5-8.00 | 5/16-24 | 1.5 | 8 | 0.5 |
| HBT5-9.00 | 5/16-24 | 1.5 | 9 | 0.5 |
| HBT5-10.00 | 5/16-24 | 1.5 | 10 | 0.5 |
| HBT5-11.00 | 5/16-24 | 1.5 | 11 | 0.5 |
| HBT5-12.00 | 5/16-24 | 1.5 | 12 | 0.5 |
| HBT5-13.00 | 5/16-24 | 1.5 | 13 | 0.5 |
| HBT5-14.00 | 5/16-24 | 1.5 | 14 | 0.5 |
| HBT5-15.00 | 5/16-24 | 1.5 | 15 | 0.5 |
| HBT5-16.00 | 5/16-24 | 1.5 | 16 | 0.5 |
| HBT5-17.00 | 5/16-24 | 1.5 | 17 | 0.5 |
| HBT5-18.00 | 5/16-24 | 1.5 | 18 | 0.5 |
| HBT5-19.00 | 5/16-24 | 1.5 | 19 | 0.5 |
| HBT5-20.00 | 5/16-24 | 1.5 | 20 | 0.5 |
| HBT5-21.00 | 5/16-24 | 1.5 | 21 | 0.5 |
| HBT5-22.00 | 5/16-24 | 1.5 | 22 | 0.5 |
| HBT5-23.00 | 5/16-24 | 1.5 | 23 | 0.5 |
| HBT5-24.00 | 5/16-24 | 1.5 | 24 | 0.5 |
| HBT5-8.31 | 5/16-24 | 1.25 | 8.31 | 0.5 |
| HBT5-15.875 | 5/16-24 | 1.25 | 15.875 | 0.5 |
| HBT5-19.50 | 5/16-24 | 1.5 | 19.50 | 0.5 |
| HBT6-3.00 | 3/8-24 | 1.375 | 3 | 0.563 |
| HBT6-4.00 | 3/8-24 | 1.5 | 4 | 0.563 |
| HBT6-5.00 | 3/8-24 | 1.5 | 5 | 0.563 |
| HBT6-6.00 | 3/8-24 | 1.5 | 6 | 0.563 |
| HBT6-7.00 | 3/8-24 | 1.5 | 7 | 0.563 |
| HBT6-8.00 | 3/8-24 | 1.5 | 8 | 0.563 |
| HBT6-9.00 | 3/8-24 | 1.5 | 9 | 0.563 |
| HBT6-10.00 | 3/8-24 | 1.5 | 10 | 0.563 |
| HBT6-11.00 | 3/8-24 | 1.5 | 11 | 0.563 |
| HBT6-12.00 | 3/8-24 | 1.5 | 12 | 0.563 |
| HBT6-13.00 | 3/8-24 | 1.5 | 13 | 0.563 |
| HBT6-14.00 | 3/8-24 | 1.5 | 14 | 0.563 |
| HBT6-15.00 | 3/8-24 | 1.5 | 15 | 0.563 |
| HBT6-16.00 | 3/8-24 | 1.5 | 16 | 0.563 |
| HBT6-17.00 | 3/8-24 | 1.5 | 17 | 0.563 |
| HBT6-18.00 | 3/8-24 | 1.5 | 18 | 0.563 |
| HBT6-19.00 | 3/8-24 | 1.5 | 19 | 0.563 |
| HBT6-20.00 | 3/8-24 | 1.5 | 20 | 0.563 |
| HBT6-21.00 | 3/8-24 | 1.5 | 21 | 0.563 |
| HBT6-22.00 | 3/8-24 | 1.5 | 22 | 0.563 |
| HBT6-23.00 | 3/8-24 | 1.5 | 23 | 0.563 |
| HBT6-24.00 | 3/8-24 | 1.5 | 24 | 0.563 |
| HBT7-3.00 | 7/16-20 | 1.375 | 3 | 0.688 |
| HBT7-4.00 | 7/16-20 | 1.625 | 4 | 0.688 |
| HBT8-2.50 | 1/2-20 | 1.25 | 2.5 | 0.75 |
| HBT8-3.00 | 1/2-20 | 1.375 | 3 | 0.75 |
| HBT8-4.00 | 1/2-20 | 1.75 | 4 | 0.75 |
| HBT8-5.00 | 1/2-20 | 1.75 | 5 | 0.75 |
| HBT8-6.00 | 1/2-20 | 1.75 | 6 | 0.75 |
| HBT8-7.00 | 1/2-20 | 1.75 | 7 | 0.75 |
| HBT8-8.00 | 1/2-20 | 1.75 | 8 | 0.75 |
| HBT8-9.00 | 1/2-20 | 1.75 | 9 | 0.75 |
| HBT8-10.00 | 1/2-20 | 1.75 | 10 | 0.75 |
| HBT8-11.00 | 1/2-20 | 1.75 | 11 | 0.75 |
| HBT8-12.00 | 1/2-20 | 1.75 | 12 | 0.75 |
| HBT8-13.00 | 1/2-20 | 1.75 | 13 | 0.75 |
| HBT8-14.00 | 1/2-20 | 1.75 | 14 | 0.75 |
| HBT8-15.00 | 1/2-20 | 1.75 | 15 | 0.75 |
| HBT8-16.00 | 1/2-20 | 1.75 | 16 | 0.75 |
| HBT8-17.00 | 1/2-20 | 1.75 | 17 | 0.75 |
| HBT8-18.00 | 1/2-20 | 1.75 | 18 | 0.75 |
| HBT8-19.00 | 1/2-20 | 1.75 | 19 | 0.75 |
| HBT8-20.00 | 1/2-20 | 1.75 | 20 | 0.75 |
| HBT8-21.00 | 1/2-20 | 1.75 | 21 | 0.75 |
| HBT8-22.00 | 1/2-20 | 1.75 | 22 | 0.75 |
| HBT8-23.00 | 1/2-20 | 1.75 | 23 | 0.75 |
| HBT10-4.00 | 5/8-18 | 1.75 | 4 | 0.875 |
| HBT10-5.00 | 5/8-18 | 2 | 5 | 0.875 |
| HBT10-6.00 | 5/8-18 | 2 | 6 | 0.875 |
| HBT10-7.00 | 5/8-18 | 2 | 7 | 0.875 |
| HBT10-8.00 | 5/8-18 | 2 | 8 | 0.875 |
| HBT10-9.00 | 5/8-18 | 2 | 9 | 0.875 |
| HBT10-10.00 | 5/8-18 | 2 | 10 | 0.875 |
| HBT10-11.00 | 5/8-18 | 2 | 11 | 0.875 |
| HBT10-12.00 | 5/8-18 | 2 | 12 | 0.875 |
| HBT10-13.00 | 5/8-18 | 2 | 13 | 0.875 |
| HBT10-14.00 | 5/8-18 | 2 | 14 | 0.875 |
| HBT10-15.00 | 5/8-18 | 2 | 15 | 0.875 |
| HBT10-16.00 | 5/8-18 | 2 | 16 | 0.875 |
| HBT10-17.00 | 5/8-18 | 2 | 17 | 0.875 |
| HBT10-18.00 | 5/8-18 | 2 | 18 | 0.875 |
| HBT10-19.00 | 5/8-18 | 2 | 19 | 0.875 |
| HBT10-20.00 | 5/8-18 | 2 | 20 | 0.875 |
| HBT10-21.00 | 5/8-18 | 2 | 21 | 0.875 |
| HBT10-22.00 | 5/8-18 | 2 | 22 | 0.875 |
| HBT10-23.00 | 5/8-18 | 2 | 23 | 0.875 |
| HBT10-24.00 | 5/8-18 | 2 | 24 | 0.875 |
| HBT10-25.00 | 5/8-18 | 2 | 25 | 0.875 |
| HBT10-26.00 | 5/8-18 | 2 | 26 | 0.875 |
| HBT12-4.00 | 3/4-16 | 1.75 | 4 | 1 |
| HBT12-5.00 | 3/4-16 | 2 | 5 | 1 |
| HBT12-6.00 | 3/4-16 | 2.5 | 6 | 1 |
| HBT12-7.00 | 3/4-16 | 2.5 | 7 | 1 |
| HBT12-8.00 | 3/4-16 | 2.5 | 8 | 1 |
| HBT12-9.00 | 3/4-16 | 2.5 | 9 | 1 |
| HBT12-10.00 | 3/4-16 | 2.5 | 10 | 1 |
| HBT12-11.00 | 3/4-16 | 2.5 | 11 | 1 |
| HBT12-12.00 | 3/4-16 | 2.5 | 12 | 1 |
| HBT12-13.00 | 3/4-16 | 2.5 | 13 | 1 |
| HBT12-14.00 | 3/4-16 | 2.5 | 14 | 1 |
| HBT12-15.00 | 3/4-16 | 2.5 | 15 | 1 |
| HBT12-16.00 | 3/4-16 | 2.5 | 16 | 1 |
| HBT12-17.00 | 3/4-16 | 2.5 | 17 | 1 |
| HBT12-18.00 | 3/4-16 | 2.5 | 18 | 1 |
| HBT12-19.00 | 3/4-16 | 2.5 | 19 | 1 |
| HBT12-20.00 | 3/4-16 | 2.5 | 20 | 1 |
| HBT12-21.00 | 3/4-16 | 2.5 | 21 | 1 |
| HBT12-22.00 | 3/4-16 | 2.5 | 22 | 1 |
| HBT12-23.00 | 3/4-16 | 2.5 | 23 | 1 |
| HBT12-24.00 | 3/4-16 | 2.5 | 24 | 1 |
| HBT12-25.00 | 3/4-16 | 2.5 | 25 | 1 |
| HBT12-26.00 | 3/4-16 | 2.5 | 26 | 1 |
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Where TURNBUCKLE HEX BAR Are Used
More from the TURNBUCKLE HEX BAR Series
Request a Quote for the TURNBUCKLE HEX BAR Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]
TURNBUCKLE HEX BAR Frequently Asked Questions
What is a turnbuckle hex bar used for?
A turnbuckle hex bar is used to adjust linkage length and alignment in threaded mechanical assemblies.
What material is standard for this series?
The standard material is carbon steel with silver zinc plating.
Why are thread and thread length the first fitment checks?
They determine compatibility with the mating hardware and how much usable threaded adjustment is available.
What does the hex bar body improve?
The hex body improves wrench engagement and makes field adjustment easier in packaged linkage systems.
Are special sizes available?
Yes. Special sizes are available in volume for OEM and repeat production demand.
How do I choose the correct part length?
Start with thread and thread length, then confirm total part length and hex size for the intended assembly.