Hydraulic-Cylinder Linkages
Use the published HCR15N dimensions and mounting geometry to review cylinder-side linkage fit.
Size 15 / 45 mm outer diameter / 53.5 mm lengthROD END / HEIM JOINT
HCR15N-15 Hydraulic Rod End Bearing, 15 mm Size
Part No.: HCR15N-15
· Male & female version available
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Size 15 mm
Inner ring width 12 mm
Dynamic load 17 kN
Static load 53 kN
Tilt angle 8°
Bearing Shell
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
Inner Ring
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
Hydraulic Rod End Bearing HCR15N Product Overview
HCR15N-15 is a metric hydraulic-cylinder rod end bearing for compact cylinder-side linkage assemblies. It combines a Forged St 52-3 steel housing with a bearing shell and inner ring made from 100Cr6 / AISI 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment.
The size-15 configuration has a 45 mm outer diameter, 12 mm inner ring width, 16 mm bearing width, 31 mm medium length, 53.5 mm overall length. Published performance values are 30-82 μm internal clearance, 17 kN dynamic load rating, 53 kN static load rating, 8° tilt angle, and approximately 220 g weight.
Hydraulic grease nipple to DIN 71412. The stated operating range is -50°C to +150°C. Confirm the cylinder geometry, side-load condition, clearance, lubrication access, and final material requirements against the HCR15N specification before production release.
Size Chart
Hydraulic Rod End Bearing HCR15N Series — Full Size Range
All available sizes in the Hydraulic Rod End Bearing HCR15N series. Can’t find your size? Contact us for custom dimensions.
| Part no. | [D] Size | [A] Outer diameter (mm) | [B] Inner ring width (mm) | [M] Bearing width (mm) | [F] Medium length (mm) | [L] Length (mm) | Internal clearance (μm) | Dynamic load rating (kN) | Static load rating (kN) | Tilt angle (°) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR15N-15 | 15 | 45 | 12 | 16 | 31 | 53.5 | 30-82 | 17 | 53 | 8 | 220 |
| HCR15N-16 | 16 | 48 | 14 | 17.5 | 35 | 59 | 30-82 | 21.2 | 59 | 10 | 290 |
| HCR15N-17 | 17 | 48 | 14 | 17.5 | 35 | 59 | 30-82 | 21.2 | 65 | 10 | 290 |
| HCR15N-20 | 20 | 50 | 16 | 19 | 38 | 63 | 30-82 | 30 | 67 | 9 | 360 |
| HCR15N-25 | 25 | 55 | 20 | 23 | 45 | 72.5 | 37-100 | 48 | 69.5 | 7 | 530 |
| HCR15N-30 | 30 | 65 | 22 | 28 | 51 | 83.5 | 37-100 | 62 | 118 | 6 | 850 |
| HCR15N-35 | 35 | 83 | 25 | 30 | 61 | 102.5 | 37-100 | 80 | 196 | 6 | 1500 |
| HCR15N-40 | 40 | 100 | 28 | 35 | 69 | 119 | 43-120 | 100 | 305 | 7 | 2420 |
| HCR15N-45 | 45 | 110 | 32 | 40 | 77 | 132 | 43-120 | 127 | 386 | 7 | 3390 |
| HCR15N-50 | 50 | 123 | 35 | 40 | 88 | 149.5 | 43-120 | 156 | 441 | 6 | 4240 |
| HCR15N-60 | 60 | 140 | 44 | 50 | 100 | 170 | 43-120 | 245 | 570 | 6 | 7100 |
| HCR15N-70 | 70 | 164 | 49 | 55 | 115 | 197 | 55-142 | 315 | 724 | 6 | 10700 |
| HCR15N-80 | 80 | 180 | 55 | 60 | 141 | 231 | 55-142 | 400 | 804 | 6 | 15100 |
| HCR15N-90 | 90 | 226 | 60 | 65 | 150 | 263 | 55-142 | 490 | 1340 | 5 | 23400 |
| HCR15N-100 | 100 | 250 | 70 | 70 | 170 | 295 | 65-165 | 610 | 1516 | 7 | 33100 |
| HCR15N-110 | 110 | 295 | 70 | 80 | 185 | 332.5 | 65-165 | 655 | 2340 | 6 | 48500 |
| HCR15N-120 | 120 | 360 | 85 | 90 | 210 | 390 | 65-165 | 950 | 3210 | 6 | 79500 |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where Hydraulic Rod End Bearing HCR15N Rod Ends Are Used
Related Products
All Products →More from the Hydraulic Rod End Bearing HCR15N Series
Get a Quote
Request a Quote for the Hydraulic Rod End Bearing HCR15N Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
Hydraulic Rod End Bearing HCR15N Frequently Asked Questions
What is the HCR15N series?
HCR15N is a metric hydraulic-cylinder rod end bearing series with published dimensional, clearance, load and ordering data.
Which HCR15N sizes are published?
The published HCR15N specification table contains 17 sizes in the listed range.
What material is used for HCR15N?
Housing: forged St 52-3 steel. Bearing shell and inner ring: 100Cr6 / AISI 52100 bearing steel, hardened and ground, with phosphate and molybdenum-disulfide surface treatment.
How is HCR15N lubricated?
Hydraulic grease nipple to DIN 71412 for service access during the operating life.
What temperature range is listed for HCR15N?
The HCR15N page lists an operating range of -50°C to +150°C under the stated material and lubrication configuration.
What should I provide for a HCR15N quotation?
Provide the required size, cylinder-side mounting geometry or drawing, duty-cycle information and any lubrication or material requirements.