related-product-inchSCW-14 CW-14 Rod End Spacer
ROD END SPACERS SCW / CW Product Overview
SCW-14 / CW-14 is a 7/8″ nominal rod end spacer. Outer flange OD (A) = 1.875″, bore (B) = 0.876″, spacer body OD (C) = 1.033″, flange thickness (D) = 0.3125″.
SCW (stainless steel) and CW (zinc plated carbon steel) rod end spacers are used to fill the gap between the rod end body and a clevis or bracket, centering the rod end in the mounting slot and preventing side loading. Install one spacer on each side of the rod end inside the clevis fork. Available in various widths to match different clevis slot depths and rod end body widths.
Stainless: SCW-14. Carbon steel (zinc plated): CW-14. Cone spacers for tapered pin assemblies: SCNS/CNS series. High-misalignment spacers: SG/HMS series.
ROD END SPACERS SCW / CW Series — Full Size Range
All available sizes in the ROD END SPACERS SCW / CW series. Can’t find your size? Contact us for custom dimensions.
| Stainless Steel | Carbon Steel | Nominal Size +.000 -.001 | A +.005 -.005 | B +.003 -.000 | C +.005 -.005 | D +.005 -.005 |
|---|---|---|---|---|---|---|
| SCW-8-2 | CW-8-2 | 1/2 | 0.870 | 0.510 | 0.684 | 0.230 |
| SCW-6-1 | CW-6-1 | 3/8 | 0.651 | 0.376 | 0.515 | 0.186 |
| SCW-4 | CW-4 | 1/4 | 0.700 | 0.251 | 0.331 | 0.142 |
| SCW-5 | CW-5 | 5/16 | 0.828 | 0.313 | 0.445 | 0.168 |
| SCW-6 | CW-6 | 3/8 | 0.930 | 0.376 | 0.515 | 0.184 |
| SCW-7 | CW-7 | 7/16 | 1.050 | 0.438 | 0.586 | 0.220 |
| SCW-10 | CW-10 | 5/8 | 1.420 | 0.626 | 0.839 | 0.270 |
| SCW-12 | CW-12 | 3/4 | 1.630 | 0.751 | 0.978 | 0.300 |
| SCW-8-1 | CW-8-1 | 1/2 | 0.750 | 0.510 | 0.684 | 0.230 |
| SCW-14 | CW-14 | 7/8 | 1.875 | 0.876 | 1.033 | 0.3125 |
| SCW-10-1 | CW-10-1 | 5/8 | 0.994 | 0.626 | 0.839 | 0.272 |
| SCW-12-1 | CW-12-1 | 3/4 | 1.141 | 0.751 | 0.978 | 0.302 |
| SCW-16 | CW-16 | 1.00 | 2.250 | 1.001 | 1.273 | 0.375 |
| SCW-8 | CW-8 | 1/2 | 1.240 | 0.501 | 0.684 | 0.228 |
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Where ROD END SPACERS SCW / CW Are Used
More from the ROD END SPACERS SCW / CW Series
Request a Quote for the ROD END SPACERS SCW / CW Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]
ROD END SPACERS SCW / CW Frequently Asked Questions
What are SCW and CW spacers used for?
They are used with rod ends and spherical bearings to control width, shoulder fit, and assembly geometry around the joint.
What is the difference between SCW and CW materials?
SCW uses stainless steel, while CW uses zinc plated carbon steel for standard plated hardware applications.
Why are B and C the first fitment dimensions?
B and C are the first dimensions used to compare spacer fit against the joint and hardware package in the assembly.
What do nominal size, A, and D help define?
Those dimensions describe shoulder profile, nominal fit, and overall spacer geometry that affect hardware stack-up and clearance.
Can these spacers be used with both rod ends and spherical bearings?
Yes. They are commonly used with both rod ends and spherical bearings where spacing and shoulder geometry must be controlled.
Can SYZ support alternate sizes or material requests?
Yes. SYZ can review alternate dimensions, material selections, and application-specific spacer requests for OEM programs.