Search by part number, series, material, application, or specification.
Press Enter to view all results Esc to close
Bore 0.3750 / 3/8-24 ThreadPCYFR6T / PCYFL6T features a 0.3750″ bore (B) and 1.125″ body diameter (D). Overall body length (AF) is 2.125″, thread engagement (CF) measures 1.062″. Width (W) is 0.875″ and body thickness (T) is 0.390″. Approximate weight: 0.200 lbs.
Rated at 11,050 lb static radial load with ±46° ultra-high misalignment angle, this 2-piece female rod end with a 3/8-24 UNF 3A internal thread suits robotic joints, steering linkages, and precision motion control systems requiring wide angular movement. The extra-wide misalignment range is achieved through a special high-misalignment 52100 bearing steel ball, precision ground and hard chrome plated.
PTFE liner is standard on all PCYM-T / PCYF-T models, providing maintenance-free, lubrication-free operation from first installation. Stud configuration available (add suffix S). Body is 4130 chromoly steel, heat treated and black oxide coated; ball is 52100 bearing steel, hard chrome plated.
All available sizes in the PCYM-T PCYF-T Metric High-Misalignment Rod Ends series. Can’t find your size? Contact us for custom dimensions.
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | AM LENGTH +.015 -.015 | N THREAD UNF 3A | CM LENGTH +.062 -.031 | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYMR6T | PCYML6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.375 | 46 | 11,050 | 0.14 |
| PCYMR7T | PCYML7T | 0.4375 | 1.312 | 1.000 | - | 2.438 | 7/16-20 | 1.500 | 58 | 14,449 | 0.22 |
| PCYMR8T | PCYML8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.625 | 60 | 16,240 | 0.33 |
| PCYMR8-10T | PCYML8-10T | 0.5000 | 1.750 | 1.250 | - | 2.875 | 5/8-18 | 1.750 | 65 | 24,158 | 0.44 |
| PCYMR10T | PCYML10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.750 | 48 | 21,219 | 0.51 |
| PCYMR10-12T | PCYML10-12T | 0.6250 | 2.000 | 1.375 | - | 3.375 | 3/4-16 | 2.000 | 64 | 30,290 | 0.68 |
| PCYMR12T | PCYML12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 2.000 | 54 | 29,127 | 0.79 |
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B | D | W | T | AF | N | CF | a° | STATIC | LBS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYFR6T | PCYFL6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.062 | 46 | 11,050 | 0.20 |
| PCYFR8T | PCYFL8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.375 | 60 | 16,240 | 0.43 |
| PCYFR10T | PCYFL10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.562 | 48 | 21,219 | 0.57 |
| PCYFR12T | PCYFL12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 1.785 | 54 | 29,127 | 0.84 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The PCYFR6T / PCYFL6T is a 2-piece female rod end with a 0.3750" bore and 3/8-24 internal thread, built for robotic joints, steering linkages, and precision motion control systems requiring wide angular movement.
Bore (B) is 0.3750", overall body length is 2.125", thread engagement is 1.062", width (W) is 0.875", body thickness (T) is 0.390", and approximate weight is 0.200 lbs.
The PCYFR6T / PCYFL6T is rated at 11,050 lb static radial load with an ultra-high misalignment angle of up to ±46° — well beyond a standard rod end's typical range.
The extra-wide misalignment range on the PCYFR6T / PCYFL6T is achieved through a special high-misalignment 52100 bearing steel ball, precision ground and hard chrome plated, paired with a PTFE-lined race — this geometry lets the ball rock through a much larger angle than a standard-clearance rod end before the body contacts the shank.
The body is 4130 chromoly steel, heat treated and black oxide coated, with a PTFE-lined race for maintenance-free, lubrication-free operation. The ball is 52100 bearing steel, precision ground, heat treated, and hard chrome plated in the special high-misalignment geometry.
PCYFR6T is the right-hand thread version and PCYFL6T is the left-hand thread version of the same female rod end — same size, materials, and rating, just opposite thread hand.
