MXM / MXF Series — Metric Rod Ends

CM-M & CF-M Series
Metric 2-Piece Carbon Steel Rod Ends

Metric Threads · Commercial / Industrial Metal-to-Metal Design · PTFE Optional

Male Rod End Choices

Female Rod End Choices

Brand Compatibility

Cross-searching

SYZ Part No.

FK Rod Ends

Aurora

QA1

Alinabal

Midwest Control

Full Spec Range

Part No.

Type	RH Part No.	LH Part No.	BDIA. +0.065 -0.012	DDIA. +0.38 -0.38	NTHREAD METRIC	WWIDTH +0.12 -0.12	TWIDTH +0.13 -0.13	AM / AFLENGTH +0.40 -0.40	CM / CFLENGTH +1.00 -1.00	A°MIS. ANGLE REF.	StaticRADIAL LOAD (kN)	WeightAPPROX. (g)
CM-M Male	CMR3M	CML3M	3	12.50	M3 X 0.5	6	4.25	27 (AM)	15 (CM)	23	1775	7
CM-M Male	CMR5M	CML5M	5	16.00	M5 X 0.8	8	5.75	33 (AM)	20 (CM)	22	5168	12
CM-M Male	CMR6M	CML6M	6	19.00	M6 X 1.0	9	6.25	36 (AM)	22 (CM)	23	7296	18
CM-M Male	CMR8M	CML8M	8	22.25	M8 X 1.25	12	8.00	42 (AM)	25 (CM)	28	13591	31
CM-M Male	CMR10M	CML10M	10	27.00	M10 X 1.5	14	9.50	48 (AM)	29 (CM)	26	21024	68
CM-M Male	CMR10Mx1.25	CML10Mx1.25	10	27.00	M10 X 1.25	14	9.50	48 (AM)	29 (CM)	26	21024	68
CM-M Male	CMR12M	CML12M	12	30.00	M12 X 1.75	16	10.75	54 (AM)	33 (CM)	27	25819	78
CM-M Male	CMR12Mx1.25	CML12Mx1.25	12	30.00	M12 X 1.25	16	10.75	54 (AM)	33 (CM)	27	25819	78

Ball: 52100 bearing steel, precision ground, heat treated, and hard chrome plated for durable commercial-industrial articulation.
Body: Carbon steel body with silver zinc plating. PTFE-lined versions are available when lower-friction self-lubricating performance is required.

Stud configurations available: add S to suffix, for example CMR12MS.
Inch size available: check the CM / CF series for inch-size equivalents.
Teflon liner: add T to suffix, for example CMR12MT.
Grease fitting: available on non-Teflon lined versions, add Z to suffix, for example CMR8MZ.
Other thread pitch available: add the pitch to suffix, for example CMR8Mx1.0.