related-product-inch3/4 Rod End Stud
ROD END STUD Product Overview
This rod end stud fits rod ends with 3/4″ bore and uses a 3/4-16 stud thread. Stud length (L) = 3.0″, shoulder length (N) = 1.812″, shoulder diameter (M) = 1.625″.
Rod end studs allow a rod end to be installed in a plain (non-threaded) bore using a nut to secure the assembly, instead of threading the rod end shank directly into a housing. The stud presses or threads into the rod end body and extends on both sides to provide a pivot pin. Used when the mounting geometry requires a stud rather than a threaded shank, or when mounting two rod ends back-to-back through a common bracket.
Available in carbon steel, alloy steel, and stainless steel. Right-hand thread standard; left-hand (SL suffix) available. Heat-treated alloy steel (SX suffix) available for high-load applications. To order a rod end with stud pre-installed, add ‘S’ to the rod end part number suffix.
ROD END STUD Series — Full Size Range
All available sizes in the ROD END STUD series. Can’t find your size? Contact us for custom dimensions.
| Rod End Bore Size | L ±.015 | N ±.010 | M Ref. | Thread UNF-2A |
|---|---|---|---|---|
| 3/16 | 1.016 | 0.500 | 0.437 | 10-32 |
| 1/4 | 1.031 | 0.562 | 0.500 | 1/4-28 |
| 5/16 | 1.219 | 0.687 | 0.593 | 5/16-24 |
| 3/8 | 1.562 | 0.906 | 0.812 | 3/8-24 |
| 7/16 | 1.750 | 1.062 | 0.937 | 7/16-20 |
| 1/2 | 2.000 | 1.125 | 1.000 | 1/2-20 |
| 5/8 | 2.500 | 1.500 | 1.375 | 5/8-18 |
| 3/4 | 3.000 | 1.812 | 1.625 | 3/4-16 |
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Where ROD END STUD Are Used
More from the ROD END STUD Series
Request a Quote for the ROD END STUD Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]
ROD END STUD Frequently Asked Questions
What is a rod end stud used for?
A rod end stud is used to adapt a rod end into a studded mounting configuration for improved assembly flexibility.
How do I specify left-hand rod end studs?
Add the LH-style suffix noted in the product documentation to specify a left-hand stud configuration.
What does the heat treated stud option change?
The heat treated alloy steel option supports applications needing higher strength and a more robust stud configuration.
Why are rod end bore size and thread the first fitment checks?
Those two dimensions determine whether the stud matches the rod end bore and the required threaded mounting hardware.
Are these studs available for multiple rod end series?
Yes. The series is intended to support a broad range of rod end sizes for assembly and mounting versatility.
Can SYZ review custom stud requirements?
Yes. SYZ can review custom stud configurations, materials, and program-specific hardware requirements.