B 0.724 / D 0.837 in.Delrin / POM Suspension Bushing – 0.724 in Bore x 0.837 in OD
Delrin / Polyurethane / UHMW Bushings Product Overview
Delrin / POM Suspension Bushing – 0.724 in Bore x 0.837 in OD is a precision engineered polymer bushing for suspension, chassis, control arm, cab mount, and custom industrial pivot assemblies.
Key dimensions: Bore 0.724 in, OD 0.837 in, D2 1 in, Width 1.8 in, Flange thickness 0.24 in.
Delrin / POM supports wear control, low-friction motion, and repeatable fitment for OEM and aftermarket bushing replacement programs.
Delrin / Polyurethane / UHMW Bushings Series — Full Size Range
All available sizes in the Delrin / Polyurethane / UHMW Bushings series. Can’t find your size? Contact us for custom dimensions.
| Part No. | B (in) (+0.01/-0.01) | D (in) (+0.01/-0.01) | D2 (in) (+0.01/-0.01) | W (in) (+0.01/-0.01) | T (in) (+0.01/-0.01) | Material Type |
|---|---|---|---|---|---|---|
| SYZ-DEL-61016 | 0.874 | 1.748 | 2.244 | 0.846 | 0.25 | Delrin / POM |
| SYZ-DEL-61217 | 0.874 | 1.748 | 2.244 | 1.378 | 0.25 | Delrin / POM |
| ASR-RU-5452233 | 0.654 | 1.026 | / | 0.628 | / | Delrin / POM |
| A-1133 PB | 0.64 | 0.823 | 1.232 | 4.031 | 0.264 | Delrin / POM |
| A-1138 PB | 0.644 | 0.825 | 1.24 | 1.173 | 0.197 | Delrin / POM |
| A-1136 PB | 0.646 | 0.825 | 1.256 | 2.626 | 0.13 | Delrin / POM |
| A-1130B | 0.76 | 0.878 | 1.114 | 0.492 | 0.059 | Delrin / POM |
| 40-1064 | 0.709 | 0.945 | 1.122 | 0.709 | 0.098 | Delrin / POM |
| 40-1144 | 0.669 | 0.945 | 1.122 | 1.102 | 0.118 | Delrin / POM |
| DELRIN SPACER 2 BLACK | 2.525 | 3.03 | 4.133 | 3.328 | 0.76 | Delrin / POM |
| 1.56 DELRIN BUSHING | 0.724 | 0.837 | 1 | 1.8 | 0.24 | Delrin / POM |
| 1.67 DELRIN BUSHING | 0.727 | 0.837 | 1 | 1.81 | 0.14 | Delrin / POM |
| A/P DELRIN BUSHING | 0.726 | 0.838 | 1 | 1.139 | 0.491 | Delrin / POM |
| AP BUSING #1 | 0.724 | 0.841 | 1 | 1.137 | 0.489 | Delrin / POM |
| AP BUSING #2 | 0.724 | 0.841 | 1 | 0.937 | 0.289 | Delrin / POM |
| AP BUSING #3 | 0.724 | 0.841 | 1 | 0.975 | 0.327 | Delrin / POM |
| LOWER ARM BUSHING | 0.99 | 1.7 | 2.3 | 1.3 | 0.29 | Delrin / POM |
| CAB MOUNT | 0.67 | 2.438 | 1 | 0.85 | 0.625 | Polyurethane |
| BUSH-C03030 | 0.988 | 1.78 | 2.232 | 0.965 | 0.197 | Polyurethane |
| BUSH-20*40 | 0.787 | 1.575 | 1.26 | 0.866 | 0.197 | Polyurethane |
| POLYURETHANE BUSHING LARGE | 0.945 | 1.811 | 1.496 | 1.102 | 0.197 | Polyurethane |
| 40-1175 | 0.593 | 0.751 | 1.185 | 0.743 | 0.158 | Polyurethane |
| LCA-POLY BUSHING | 1.011 | 1.762 | 2.229 | 0.937 | 0.18 | Polyurethane |
| M23016-BK-01 | 1 | 1.89 | 1.51 | 1.093 | 0.253 | Polyurethane |
| MAVERICK X3 BUSHING | 0.757 | 1.035 | 1.375 | 0.912 | 0.174 | UHMW |
| TKBUSH1 | 0.642 | 0.827 | 1.24 | 1.173 | 0.201 | UHMW |
| TKBUSH2 | 0.65 | 1.024 | / | 0.63 | / | UHMW |
| TKBUSH3 | 0.65 | 0.827 | 1.24 | 1.358 | 0.26 | UHMW |
| TKBUSH4 | 0.642 | 0.827 | 1.24 | 4.016 | 0.283 | UHMW |
| TKBUSH5 | 1.248 | 1.508 | 1.87 | 0.748 | 0.118 | UHMW |
| TKBUSH6 | 0.768 | 1.181 | / | 0.709 | / | UHMW |
| ZY00269 - BUSHING (UHMW) | 0.787 | 1.023 | 1.378 | 0.915 | 0.187 | UHMW |
| C21K0387-U01D11001001-01 | 0.632 | 0.831 | 1.181 | 1.181 | 0.315 | UHMW |
| C02995-BK001-A UHMW BUSHING WITH SEAL | 0.758 | 1.185 | / | 0.717 | / | UHMW |
| C02995-BK001-C UHMW BUSHING WITH TWO SEALS | 0.761 | 1.182 | / | 0.711 | / | UHMW |
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Where Delrin / Polyurethane / UHMW Bushings Are Used
More from the Delrin / Polyurethane / UHMW Bushings Series
Request a Quote for the Delrin / Polyurethane / UHMW Bushings Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]
Delrin / Polyurethane / UHMW Bushings Frequently Asked Questions
What materials are available in this bushing family?
This family covers Delrin / POM, polyurethane, and UHMW materials so buyers can compare rigidity, compliance, wear resistance, and impact performance.
How do I choose between Delrin, polyurethane, and UHMW?
Choose Delrin / POM for rigidity and low friction, polyurethane for compliance and vibration control, and UHMW for wear and impact resistance.
Which dimensions should I check first?
Start with B bore, D outside diameter, D2 flange or secondary diameter, W width, and T flange thickness where applicable.
What does “/” mean in the size chart?
A slash means the dimension is not used for that part geometry, usually because the bushing does not have that secondary feature.
Can these bushings be used for suspension and chassis applications?
Yes. They are commonly used in suspension, control-arm, chassis, cab-mount, and custom industrial assemblies.
Can SYZ support custom bushing materials or sizes?
Yes. Send the target drawing, material preference, quantity, and application details for custom bushing review.