B 0.99 / D 1.7 in.Delrin / POM Suspension Bushing – 0.99 in Bore x 1.7 in OD is a precision engineered polymer bushing for suspension, chassis, control arm, cab mount, and custom industrial pivot assemblies.
Key dimensions: Bore 0.99 in, OD 1.7 in, D2 2.3 in, Width 1.3 in, Flange thickness 0.29 in.
Delrin / POM supports wear control, low-friction motion, and repeatable fitment for OEM and aftermarket bushing replacement programs.
All available sizes in the Delrin / Polyurethane / UHMW Bushings series. Can’t find your size? Contact us for custom dimensions.
| Part No. | B (in) (+0.01/-0.01) | D (in) (+0.01/-0.01) | D2 (in) (+0.01/-0.01) | W (in) (+0.01/-0.01) | T (in) (+0.01/-0.01) | Material Type |
|---|---|---|---|---|---|---|
| SYZ-DEL-61016 | 0.874 | 1.748 | 2.244 | 0.846 | 0.25 | Delrin / POM |
| SYZ-DEL-61217 | 0.874 | 1.748 | 2.244 | 1.378 | 0.25 | Delrin / POM |
| ASR-RU-5452233 | 0.654 | 1.026 | / | 0.628 | / | Delrin / POM |
| A-1133 PB | 0.64 | 0.823 | 1.232 | 4.031 | 0.264 | Delrin / POM |
| A-1138 PB | 0.644 | 0.825 | 1.24 | 1.173 | 0.197 | Delrin / POM |
| A-1136 PB | 0.646 | 0.825 | 1.256 | 2.626 | 0.13 | Delrin / POM |
| A-1130B | 0.76 | 0.878 | 1.114 | 0.492 | 0.059 | Delrin / POM |
| 40-1064 | 0.709 | 0.945 | 1.122 | 0.709 | 0.098 | Delrin / POM |
| 40-1144 | 0.669 | 0.945 | 1.122 | 1.102 | 0.118 | Delrin / POM |
| DELRIN SPACER 2 BLACK | 2.525 | 3.03 | 4.133 | 3.328 | 0.76 | Delrin / POM |
| 1.56 DELRIN BUSHING | 0.724 | 0.837 | 1 | 1.8 | 0.24 | Delrin / POM |
| 1.67 DELRIN BUSHING | 0.727 | 0.837 | 1 | 1.81 | 0.14 | Delrin / POM |
| A/P DELRIN BUSHING | 0.726 | 0.838 | 1 | 1.139 | 0.491 | Delrin / POM |
| AP BUSING #1 | 0.724 | 0.841 | 1 | 1.137 | 0.489 | Delrin / POM |
| AP BUSING #2 | 0.724 | 0.841 | 1 | 0.937 | 0.289 | Delrin / POM |
| AP BUSING #3 | 0.724 | 0.841 | 1 | 0.975 | 0.327 | Delrin / POM |
| LOWER ARM BUSHING | 0.99 | 1.7 | 2.3 | 1.3 | 0.29 | Delrin / POM |
| CAB MOUNT | 0.67 | 2.438 | 1 | 0.85 | 0.625 | Polyurethane |
| BUSH-C03030 | 0.988 | 1.78 | 2.232 | 0.965 | 0.197 | Polyurethane |
| BUSH-20*40 | 0.787 | 1.575 | 1.26 | 0.866 | 0.197 | Polyurethane |
| POLYURETHANE BUSHING LARGE | 0.945 | 1.811 | 1.496 | 1.102 | 0.197 | Polyurethane |
| 40-1175 | 0.593 | 0.751 | 1.185 | 0.743 | 0.158 | Polyurethane |
| LCA-POLY BUSHING | 1.011 | 1.762 | 2.229 | 0.937 | 0.18 | Polyurethane |
| M23016-BK-01 | 1 | 1.89 | 1.51 | 1.093 | 0.253 | Polyurethane |
| MAVERICK X3 BUSHING | 0.757 | 1.035 | 1.375 | 0.912 | 0.174 | UHMW |
| TKBUSH1 | 0.642 | 0.827 | 1.24 | 1.173 | 0.201 | UHMW |
| TKBUSH2 | 0.65 | 1.024 | / | 0.63 | / | UHMW |
| TKBUSH3 | 0.65 | 0.827 | 1.24 | 1.358 | 0.26 | UHMW |
| TKBUSH4 | 0.642 | 0.827 | 1.24 | 4.016 | 0.283 | UHMW |
| TKBUSH5 | 1.248 | 1.508 | 1.87 | 0.748 | 0.118 | UHMW |
| TKBUSH6 | 0.768 | 1.181 | / | 0.709 | / | UHMW |
| ZY00269 - BUSHING (UHMW) | 0.787 | 1.023 | 1.378 | 0.915 | 0.187 | UHMW |
| C21K0387-U01D11001001-01 | 0.632 | 0.831 | 1.181 | 1.181 | 0.315 | UHMW |
| C02995-BK001-A UHMW BUSHING WITH SEAL | 0.758 | 1.185 | / | 0.717 | / | UHMW |
| C02995-BK001-C UHMW BUSHING WITH TWO SEALS | 0.761 | 1.182 | / | 0.711 | / | UHMW |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The LOWER ARM BUSHING is a Delrin / POM bushing machined for suspension, chassis, control-arm, cab-mount, and custom industrial pivot assemblies, sized around a 0.99 in bore x 1.7 in OD x 1.3 in width.
The LOWER ARM BUSHING measures 0.99 in bore (B), 1.7 in outer diameter (D), and 1.3 in width (W) — check these three figures against your housing bore and shaft/pin diameter before ordering.
Delrin / POM construction gives the LOWER ARM BUSHING wear control and low-friction motion at its 0.99 in bore, which is why it's specified for suspension, chassis, and control-arm pivot points in OEM and aftermarket bushing-replacement work.
The LOWER ARM BUSHING has a flanged profile with a 2.3 in flange OD (D2) and a 0.29 in flange thickness (T), in addition to its 0.99 in bore and 1.7 in body OD — check the flange OD against your mounting counterbore before installing.
Confirm the 0.99 in bore, 1.7 in OD, and 1.3 in width against your actual shaft/pin and housing dimensions, plus the Delrin / POM material call-out. SYZ does not publish a load rating or chemical-resistance spec for this part number, so flag those requirements when requesting a quote if they matter for your application.
Yes. SYZ machines Delrin / POM, polyurethane, and UHMW bushings to custom bore, OD, width, and flange dimensions for OEM and aftermarket replacement programs — provide your target dimensions when requesting a quote based on the LOWER ARM BUSHING.
