B 0.642 / D 0.827 in.UHMW Self-Lubricating Bushing – 0.642 in Bore x 0.827 in OD is a precision engineered polymer bushing for suspension, chassis, control arm, cab mount, and custom industrial pivot assemblies.
Key dimensions: Bore 0.642 in, OD 0.827 in, D2 1.24 in, Width 1.173 in, Flange thickness 0.201 in.
UHMW supports wear control, low-friction motion, and repeatable fitment for OEM and aftermarket bushing replacement programs.
All available sizes in the Delrin / Polyurethane / UHMW Bushings series. Can’t find your size? Contact us for custom dimensions.
| Part No. | B (in) (+0.01/-0.01) | D (in) (+0.01/-0.01) | D2 (in) (+0.01/-0.01) | W (in) (+0.01/-0.01) | T (in) (+0.01/-0.01) | Material Type |
|---|---|---|---|---|---|---|
| SYZ-DEL-61016 | 0.874 | 1.748 | 2.244 | 0.846 | 0.25 | Delrin / POM |
| SYZ-DEL-61217 | 0.874 | 1.748 | 2.244 | 1.378 | 0.25 | Delrin / POM |
| ASR-RU-5452233 | 0.654 | 1.026 | / | 0.628 | / | Delrin / POM |
| A-1133 PB | 0.64 | 0.823 | 1.232 | 4.031 | 0.264 | Delrin / POM |
| A-1138 PB | 0.644 | 0.825 | 1.24 | 1.173 | 0.197 | Delrin / POM |
| A-1136 PB | 0.646 | 0.825 | 1.256 | 2.626 | 0.13 | Delrin / POM |
| A-1130B | 0.76 | 0.878 | 1.114 | 0.492 | 0.059 | Delrin / POM |
| 40-1064 | 0.709 | 0.945 | 1.122 | 0.709 | 0.098 | Delrin / POM |
| 40-1144 | 0.669 | 0.945 | 1.122 | 1.102 | 0.118 | Delrin / POM |
| DELRIN SPACER 2 BLACK | 2.525 | 3.03 | 4.133 | 3.328 | 0.76 | Delrin / POM |
| 1.56 DELRIN BUSHING | 0.724 | 0.837 | 1 | 1.8 | 0.24 | Delrin / POM |
| 1.67 DELRIN BUSHING | 0.727 | 0.837 | 1 | 1.81 | 0.14 | Delrin / POM |
| A/P DELRIN BUSHING | 0.726 | 0.838 | 1 | 1.139 | 0.491 | Delrin / POM |
| AP BUSING #1 | 0.724 | 0.841 | 1 | 1.137 | 0.489 | Delrin / POM |
| AP BUSING #2 | 0.724 | 0.841 | 1 | 0.937 | 0.289 | Delrin / POM |
| AP BUSING #3 | 0.724 | 0.841 | 1 | 0.975 | 0.327 | Delrin / POM |
| LOWER ARM BUSHING | 0.99 | 1.7 | 2.3 | 1.3 | 0.29 | Delrin / POM |
| CAB MOUNT | 0.67 | 2.438 | 1 | 0.85 | 0.625 | Polyurethane |
| BUSH-C03030 | 0.988 | 1.78 | 2.232 | 0.965 | 0.197 | Polyurethane |
| BUSH-20*40 | 0.787 | 1.575 | 1.26 | 0.866 | 0.197 | Polyurethane |
| POLYURETHANE BUSHING LARGE | 0.945 | 1.811 | 1.496 | 1.102 | 0.197 | Polyurethane |
| 40-1175 | 0.593 | 0.751 | 1.185 | 0.743 | 0.158 | Polyurethane |
| LCA-POLY BUSHING | 1.011 | 1.762 | 2.229 | 0.937 | 0.18 | Polyurethane |
| M23016-BK-01 | 1 | 1.89 | 1.51 | 1.093 | 0.253 | Polyurethane |
| MAVERICK X3 BUSHING | 0.757 | 1.035 | 1.375 | 0.912 | 0.174 | UHMW |
| TKBUSH1 | 0.642 | 0.827 | 1.24 | 1.173 | 0.201 | UHMW |
| TKBUSH2 | 0.65 | 1.024 | / | 0.63 | / | UHMW |
| TKBUSH3 | 0.65 | 0.827 | 1.24 | 1.358 | 0.26 | UHMW |
| TKBUSH4 | 0.642 | 0.827 | 1.24 | 4.016 | 0.283 | UHMW |
| TKBUSH5 | 1.248 | 1.508 | 1.87 | 0.748 | 0.118 | UHMW |
| TKBUSH6 | 0.768 | 1.181 | / | 0.709 | / | UHMW |
| ZY00269 - BUSHING (UHMW) | 0.787 | 1.023 | 1.378 | 0.915 | 0.187 | UHMW |
| C21K0387-U01D11001001-01 | 0.632 | 0.831 | 1.181 | 1.181 | 0.315 | UHMW |
| C02995-BK001-A UHMW BUSHING WITH SEAL | 0.758 | 1.185 | / | 0.717 | / | UHMW |
| C02995-BK001-C UHMW BUSHING WITH TWO SEALS | 0.761 | 1.182 | / | 0.711 | / | UHMW |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The TKBUSH1 is a UHMW bushing machined for suspension, chassis, control-arm, cab-mount, and custom industrial pivot assemblies, sized around a 0.642 in bore x 0.827 in OD x 1.173 in width.
The TKBUSH1 measures 0.642 in bore (B), 0.827 in outer diameter (D), and 1.173 in width (W) — check these three figures against your housing bore and shaft/pin diameter before ordering.
Yes — the TKBUSH1 is sold as a UHMW self-lubricating bushing. UHMW runs low-friction against its mating shaft without added grease, which is why it's specified for wear control and repeatable fitment in OEM and aftermarket bushing-replacement programs.
The TKBUSH1 has a flanged profile with a 1.24 in flange OD (D2) and a 0.201 in flange thickness (T), in addition to its 0.642 in bore and 0.827 in body OD — check the flange OD against your mounting counterbore before installing.
Confirm the 0.642 in bore, 0.827 in OD, and 1.173 in width against your actual shaft/pin and housing dimensions, plus the UHMW material call-out. SYZ does not publish a load rating or chemical-resistance spec for this part number, so flag those requirements when requesting a quote if they matter for your application.
Yes. SYZ machines Delrin / POM, polyurethane, and UHMW bushings to custom bore, OD, width, and flange dimensions for OEM and aftermarket replacement programs — provide your target dimensions when requesting a quote based on the TKBUSH1.
