Hydraulic-Cylinder Linkages
Use the published HCR10C dimensions and mounting geometry to review cylinder-side linkage fit.
Size 10 / 29 mm outer diameter / 38.5 mm lengthROD END / HEIM JOINT
HCR10C-10 Hydraulic Rod End Bearing, 10 mm Size
Part No.: HCR10C-10
· Male & female version available
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Size 10 mm
Inner ring width 9 mm
Diameter 3 mm
Dynamic load 8.15 kN
Static load 15.6 kN
Tilt angle 12°
Bearing Shell
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
Inner Ring
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
Hydraulic Rod End Bearing HCR10C Product Overview
HCR10C-10 is a metric hydraulic-cylinder rod end bearing for compact cylinder-side linkage assemblies. It combines a forged St 52-3 steel housing with a hardened and ground 100Cr6 / AISI 52100 bearing shell and inner ring, with phosphate and molybdenum-disulfide surface treatment.
The size-10 configuration has a 29 mm outer diameter, 9 mm inner ring width, 7 mm bearing width, 24 mm medium length, 3 mm diameter, and 38.5 mm overall length. Published performance values are 23–68 μm internal clearance, 8.15 kN dynamic load rating, 15.6 kN static load rating, 15 mm collar diameter, 12° tilt angle, and approximately 40 g weight.
Sizes 10–12 use the stated no-fitting lubrication configuration. Confirm the cylinder geometry, side-load condition, clearance, temperature range, and final material requirements against the HCR10C specification before production release.
Size Chart
Hydraulic Rod End Bearing HCR10C Series — Full Size Range
All available sizes in the Hydraulic Rod End Bearing HCR10C series. Can’t find your size? Contact us for custom dimensions.
| Part no. | [D] Size | [A] Outer diameter (mm) | [B] Inner ring width (mm) | [M] Bearing width (mm) | [F] Medium length (mm) | [J] Diameter (mm) | [L] Length (mm) | [L1] Length (mm) | Internal clearance (μm) | Dynamic load rating (kN) | Static load rating (kN) | [K] Collar diameter (mm) | Tilt angle (°) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR10C-10 | 10 | 29 | 9 | 7 | 24 | 3 | 38.5 | 1.5 | 23-68 | 8.15 | 15.6 | 15 | 12 | 40 |
| HCR10C-12 | 12 | 34 | 10 | 8 | 27 | 3 | 44 | 1.5 | 23-68 | 10.8 | 21.6 | 17.5 | 11 | 60 |
| HCR10C-15 | 15 | 40 | 12 | 10 | 31 | 4 | 51 | 2 | 30-82 | 17 | 32 | 21 | 8 | 120 |
| HCR10C-16 | 16 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 |
| HCR10C-17 | 17 | 46 | 14 | 11 | 35 | 4 | 58 | 2 | 30-82 | 21.2 | 40 | 24 | 10 | 180 |
| HCR10C-20 | 20 | 53 | 16 | 13 | 38 | 4 | 64.5 | 2 | 30-82 | 30 | 54 | 27.5 | 9 | 260 |
| HCR10C-25 | 25 | 64 | 20 | 17 | 45 | 4 | 77 | 3 | 37-100 | 48 | 72 | 33.5 | 7 | 450 |
| HCR10C-30 | 30 | 73 | 22 | 19 | 51 | 4 | 87.5 | 3 | 37-100 | 62 | 95 | 40 | 6 | 670 |
| HCR10C-35 | 35 | 82 | 25 | 21 | 61 | 4 | 102 | 3 | 37-100 | 80 | 125 | 47 | 6 | 1020 |
| HCR10C-40 | 40 | 92 | 28 | 23 | 69 | 4 | 115 | 4 | 43-120 | 100 | 156 | 52 | 7 | 1400 |
| HCR10C-45 | 45 | 102 | 32 | 27 | 77 | 6 | 128 | 4 | 43-120 | 127 | 208 | 58 | 7 | 1930 |
| HCR10C-50 | 50 | 112 | 35 | 30 | 88 | 6 | 144 | 4 | 43-120 | 156 | 250 | 62 | 6 | 2690 |
| HCR10C-60 | 60 | 135 | 44 | 38 | 100 | 6 | 167.5 | 4 | 43-120 | 245 | 390 | 70 | 6 | 4600 |
| HCR10C-70 | 70 | 160 | 49 | 42 | 115 | 6 | 195 | 5 | 55-142 | 315 | 510 | 80 | 6 | 7000 |
| HCR10C-80 | 80 | 180 | 55 | 47 | 141 | 6 | 231 | 5 | 55-142 | 400 | 620 | 95 | 6 | 11000 |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where Hydraulic Rod End Bearing HCR10C Rod Ends Are Used
Related Products
All Products →More from the Hydraulic Rod End Bearing HCR10C Series
Get a Quote
Request a Quote for the Hydraulic Rod End Bearing HCR10C Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
Hydraulic Rod End Bearing HCR10C Frequently Asked Questions
What is the HCR10C-10 hydraulic rod end bearing used for?
The HCR10C-10 is a compact metric hydraulic-cylinder rod end bearing for cylinder-side linkage and articulated mechanical assemblies.
What are the main dimensions of HCR10C-10?
The HCR10C-10 has a 10 mm size, 29 mm outer diameter, 9 mm inner ring width, 7 mm bearing width, 24 mm medium length, 38.5 mm length, and 15 mm collar diameter.
What load ratings does HCR10C-10 provide?
Its published dynamic load rating is 8.15 kN and its static load rating is 15.6 kN. Confirm the final selection against the complete application load case.
What materials are used in HCR10C-10?
The housing is forged St 52-3 steel. The bearing shell and inner ring use hardened and ground 100Cr6 / AISI 52100 bearing steel with phosphate and molybdenum-disulfide surface treatment.
What clearance and tilt angle are specified?
The published internal clearance is 23-68 and the tilt angle is 12 degrees. Confirm the required articulation and clearance for the cylinder assembly.
What temperature range is specified for this part?
The specified temperature resistance is -50°C to +150°C. Actual service limits also depend on lubrication, sealing, load, and operating conditions.