Hydraulic-Cylinder Linkages
Use the published HCR10C dimensions and mounting geometry to review cylinder-side linkage fit.
Hydraulic Rod End Bearing HCR10C
Metric hydraulic rod end bearings for cylinder linkages, with a forged St 52-3 steel housing, 100Cr6 / AISI 52100 bearing steel shell and inner ring, phosphate and molybdenum-disulfide surface treatment, and size-dependent lubrication provisions. The published HCR10C range covers sizes 10–80.
ISO 9001 Certified
SGS Verified
OEM / ODM Ready
0
SKUs in this series
-
Primary size range
-
Secondary size range
Page 1
Need Something Different?
Can't find the right specification?
Tell us the dimensional target, material preference, and application constraints. We'll help match or develop the right solution.
Ask for Custom SupportProduct Definition
What Is Hydraulic Rod End Bearing HCR10C?
HCR10C is a metric hydraulic-cylinder rod end bearing series for compact rod-end linkage assemblies. It combines a forged St 52-3 steel housing with a hardened and ground 100Cr6 / AISI 52100 bearing shell and inner ring. Use the published dimensions, clearance, load ratings and tilt-angle values to match the cylinder design.
Typical Applications
Applications for Hydraulic Rod End Bearing HCR10C
Cylinder-Side Mounting
Confirm bore, housing envelope, thread details and available tilt angle for the HCR10C installation.
Product FAQ
Frequently Asked Questions
What is the HCR10C series?
HCR10C is a metric hydraulic-cylinder rod end bearing series with published dimensional, clearance, load and ordering data.
Which HCR10C sizes are published?
The published HCR10C specification table contains 15 sizes in the listed range.
What material is used for HCR10C?
Housing: forged St 52-3 steel. Bearing shell and inner ring: 100Cr6 / AISI 52100 bearing steel, hardened and ground, with phosphate and molybdenum-disulfide surface treatment.
How is HCR10C lubricated?
Sizes 10–12 have no lubrication fitting; sizes 15–20 use a grease hole; sizes 25–80 use a DIN 71412 hydraulic grease nipple.
What temperature range is listed for HCR10C?
The HCR10C page lists an operating range of -50°C to +150°C under the stated material and lubrication configuration.
What should I provide for a HCR10C quotation?
Provide the required size, cylinder-side mounting geometry or drawing, duty-cycle information and any lubrication or material requirements.