Weld-In Tube Ends for Linkages
Threaded tube adapters create a repeatable interface between tubing and rod ends, clevises, or adjusters. Select the tube OD and wall thickness together with thread size and weld access.
TUBE ADAPTERS
• Material: 4130 chromoly steel (Mild steel optional).
• Identification: Left hand marked with grooves.
• Hex: Hex available.
• Special Sizes: Available in volume.
ISO 9001 Certified
SGS Verified
OEM / ODM Ready
0
SKUs in this series
-
Primary size range
-
Secondary size range
Page 1
Need Something Different?
Can't find the right specification?
Tell us the dimensional target, material preference, and application constraints. We'll help match or develop the right solution.
Ask for Custom SupportProduct Definition
What Is TUBE ADAPTERS?
TUBE ADAPTERS are threaded or weld-in tube-end components that create a replaceable interface between tubing and rod ends, clevises, studs, or adjusters. They are used in custom control arms, tie rods, chassis members, actuator rods, and fabricated machine linkages. Match tube OD and wall thickness to the adapter, then control fit-up, weld penetration, concentricity, thread engagement, and post-weld inspection.
Typical Applications
Applications for TUBE ADAPTERS
Custom Control Arms and Chassis
Adapters are commonly welded into fabricated suspension links, tie rods, and chassis members to make serviceable threaded joints. Check fit-up, weld penetration, alignment, and post-weld inspection.
Industrial Frames and Actuator Rods
The same interface can support custom machine linkages and actuator rods where a tubular member needs a replaceable threaded end. Match material and surface treatment to the operating environment.
Agricultural Linkages
Suitable for heavy-duty agricultural linkages and repair assemblies using fabricated threaded tubing.
OEM Tube Programs
A practical fit for OEM tube programs that need repeat geometry, female thread consistency, and custom size availability.
Weldable Hardware Systems
Chosen where weldable chromoly hardware and optional hex engagement improve build and service efficiency.
Product FAQ
Frequently Asked Questions
What are tube adapters used for?
Tube adapters are used to create strong female threaded ends in fabricated tube assemblies, especially for rod ends, suspension links, and steering components.
What material is used in this series?
This series uses 4130 chromoly steel as standard, with mild steel optional depending on the application and order requirements.
How are left-hand versions identified?
Left-hand tube adapters are identified by grooves, as noted in the specification guide.
Is hex available on these adapters?
Yes. Hex is available on this series to improve wrench engagement during fabrication and adjustment.
Can special sizes be supplied?
Yes. Special sizes are available in volume. Send us a print or sample for custom size development.
How do I choose the correct tube adapter?
Choose by tube OD and wall thickness first, then match the required female thread size and any identification or hex requirement.