Pinned Rod and Cylinder Connections
Clevis ends create a straightforward pinned connection for rods, actuator eyes, and cylinder attachments where the clevis pin provides the pivot. Check pin fit, side clearance, shear load, and retention details.
3/4-16RELATED PRODUCT
CR6-12 CL6-12 Clevis
Part No.: CR6-12
· Thread-adjustment and fabrication hardware series
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Thread Male 3/4-16
B DIA. 0.3750 in.
Carbon steel zinc plated standard
Stainless steel optional for corrosion resistance
RH and LH clevis versions available
Widths and lengths vary by linkage package requirement
Material
Carbon steel
Surface
Zinc plating (polished, hard chrome plating available)
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
CLEVIS CR CL Product Overview
CR6-12 / CL6-12 is a carbon steel clevis with 0.375″ pin bore (B) and 3/4-16 male thread. Pin bore OD housing (D) = 1.125″, width (W) = 0.825″, slot width (S) = 0.375″. Total length (A) = 3.375″, fork length (C) = 2.0″.
The CR/CL clevis is zinc plated carbon steel machined to accept a standard clevis pin through the fork. The threaded shank connects to a rod end, tube adapter, or threaded rod. Used in steering linkages, throttle controls, brake assemblies, and general-purpose pivot connections requiring a bifurcated end fitting.
Available in right-hand (CR6-12) and left-hand (CL6-12) thread configurations. Stainless steel option available. Polished and hard chrome plating available on request. Works with clevis pins, washers, and cotter pins (sold separately).
Size Chart
CLEVIS CR CL Series — Full Size Range
All available sizes in the CLEVIS CR CL series. Can’t find your size? Contact us for custom dimensions.
| Right Hand Part No. | Left Hand Part No. | Thread Male 3A REF | B DIA. +.005 -.000 | D DIA. +.010 -.010 | W Width +.005 -.005 | S Width +.005 -.005 | A Length +.015 -.015 | C Length +.062 -.031 |
|---|---|---|---|---|---|---|---|---|
| CR4-5 | CL4-5 | 5/16-24 | 0.2500 | 0.875 | 0.625 | 0.188 | 2.250 | 1.250 |
| CR5-5 | CL5-5 | 5/16-24 | 0.3125 | 0.875 | 0.625 | 0.188 | 2.250 | 1.250 |
| CR5-6 | CL5-6 | 3/8-24 | 0.3125 | 0.875 | 0.625 | 0.188 | 2.250 | 1.250 |
| CR5-8 | CL5-8 | 1/2-20 | 0.3125 | 1.000 | 0.750 | 0.250 | 2.500 | 1.500 |
| CR6-8 | CL6-8 | 1/2-20 | 0.3750 | 1.000 | 0.750 | 0.250 | 2.500 | 1.500 |
| CR6-10 | CL6-10 | 5/8-18 | 0.3750 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR6-12 | CL6-12 | 3/4-16 | 0.3750 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR7-8 | CL7-8 | 1/2-20 | 0.4375 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR7-10 | CL7-10 | 5/8-18 | 0.4375 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR8-10 | CL8-10 | 5/8-18 | 0.5000 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
| CR8-12 | CL8-12 | 3/4-16 | 0.5000 | 1.125 | 0.825 | 0.250 | 3.375 | 2.000 |
| CR8-12-1 | CL8-12-1 | 3/4-16 | 0.5000 | 1.125 | 0.825 | 0.375 | 3.375 | 2.000 |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where CLEVIS CR CL Are Used
Related Products
All Products →More from the CLEVIS CR CL Series
Get a Quote
Request a Quote for the CLEVIS CR CL Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
CLEVIS CR CL Frequently Asked Questions
What is the CR6-12/CL6-12 clevis used for?
The CR6-12/CL6-12 is a zinc-plated carbon steel clevis machined to accept a standard clevis pin through its fork, with a 3/4-16 threaded shank on the opposite end connecting to a rod end, tube adapter, or threaded rod. It's used in steering linkages, throttle controls, brake assemblies, and general-purpose pivot connections that need a bifurcated (forked) end fitting.
What is the difference between the CR6-12 and CL6-12?
CR6-12 is the right-hand thread version and CL6-12 is the left-hand thread version of the same clevis — order the matching hand for your rod end or turnbuckle-style adjuster assembly.
What pin bore and thread size does the CR6-12/CL6-12 have?
Pin bore (B) is 0.375" and the male thread is 3/4-16, sized to take a matching clevis pin through the fork and thread into a 3/4-16 rod end or rod.
What are the overall body dimensions of the CR6-12/CL6-12?
Pin bore OD housing (D) is 1.125", width (W) is 0.825", slot width (S) is 0.375". Total length (A) is 3.375" and fork length (C) is 2.0" — confirm these against your mounting bracket and pin length before ordering.
What material is the CR6-12/CL6-12 made from, and are other finishes available?
Standard construction is carbon steel with a zinc-plated finish. A stainless steel version is available, and polished or hard chrome plating can be requested on top of the standard finish.
What hardware do I need to complete a CR6-12/CL6-12 assembly?
The clevis pin, washer, and cotter pin that go through the fork are sold separately — order them to match the 0.375" pin bore, and confirm quantities when requesting a quote.