PM/PF Injection Molded Self Lubricating Rod Ends
- Injection Molded Race, Self Lubricating
Ball:52100 Bearing Steel, Precision Ground, Heat Treated, Hard Chrome Plated
Race: Injection Molded Nylon
Body: Carbon Steel, Yellow Zinc Plated Type: Male/Female
Thread: Right/Left
Regular Size: Male Type from PM3-12/Female Type from PF3-12
Inch Size and Metric Size Both Available
PM/PF Injection Molded Self Lubricating Rod Ends Overview
PM/PF Injection Rod Ends Details
| BALL | RACE | BODY | |||||
| 52100 BEARING STEEL | INJECTION | CARBON STEEL | |||||
| PRECISION GROUND | MOLDED | YELLOW ZINC PLATED | |||||
| HEAT TREATED | REINFORCED | ||||||
| HARD CHROME PLATED | NYLON with PTFE | ||||||
Type: Male/Female
Thread: Right/Left
Regular Size: Male Type from PM3-12/Female Type from PF3-12
Inch Size and Metric Size Both Available
Custom Option: Material/Size/Stud Configurations
PM/PF Injection Rod Ends Size Chart
PM..G ROD END B D W T BALL AM N CM a° STATIC APPROX RIGHT LEFT DIA. DIA. WIDTH WIDTH DIA. LENGTH THREAD LENGTH MIS. RADIAL WEIGHT HAND HAND +0.0025 +0.010 +0.005 REF. REF. +0.015 UNF +0.062 ANGLE LOAD (LBS) PART NO. PART NO. -0.0005 -0.010 -0.005 -0.015 3A -0.031 REF. (LBS) PMR-3 PML-3 0.1900 0.625 0.312 0.250 0.437 1.250 10-32 0.750 13 1,174 0.03 PMR-4 PML-4 0.2500 0.750 0.375 0.281 0.500 1.562 1/4-28 1.000 16 2,168 0.04 PMR-5 PML-5 0.3125 0.875 0.437 0.344 0.625 1.875 5/16-24 1.250 14 2,796 0.07 PMR-6 PML-6 0.3750 1.000 0.500 0.406 0.719 1.938 3/8-24 1.250 12 4,012 0.11 PMR-7 PML-7 0.4375 1.125 0.562 0.437 0.812 2.125 7/16-20 1.375 14 4,244 0.16 PMR-8 PML-8 0.5000 1.312 0.625 0.500 0.937 2.438 1/2-20 1.500 12 6,453 0.25 PMR-10 PML-10 0.6250 1.500 0.750 0.562 1.125 2.625 5/8-18 1.625 16 7,400 0.38 PMR-12 PML-12 0.7500 1.750 0.875 0.687 1.312 2.875 3/4-16 1.750 14 10,937 0.60 PF..G ROD END B D W T BALL AF N CF a° STATIC APPROX PFR-3 PFL-3 0.1900 0.625 0.312 0.250 0.437 1.062 10-32 0.500 13 1,220 0.04 PFR-4 PFL-4 0.2500 0.750 0.375 0.281 0.500 1.312 1/4-28 0.687 16 2,500 0.06 PFR-5 PFL-5 0.3125 0.875 0.437 0.344 0.625 1.375 5/16-24 0.687 14 2,753 0.09 PFR-6 PFL-6 0.3750 1.000 0.500 0.406 0.719 1.625 3/8-24 0.812 12 3,950 0.15 PFR-7 PFL-7 0.4375 1.125 0.562 0.437 0.812 1.812 7/16-20 0.937 14 4,300 0.2 PFR-8 PFL-8 0.5000 1.312 0.625 0.500 0.937 2.125 1/2-20 1.062 12 6,453 0.33 PFR-10 PFL-10 0.6250 1.500 0.750 0.562 1.125 2.500 5/8-18 1.375 16 7,400 0.48 PFR-12 PFL-12 0.7500 1.750 0.875 0.687 1.312 2.875 3/4-16 1.562 14 10,937 0.72
Custom Service Process: Select Similar Product — Confirm MOQ — Send Inquiry — Send your Drawings or Samples — Customization
Select product (If your product is not on our website, select a similar product) — Confirm the quantity you need meet up with our MOQ — Send inquiry with your Drawings or Samples — We will reply to you and confirm details — Send details to our factory and start customization
Hot Selling Products
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified before machining and assembly begin.
Dimensional Check
Critical dimensions are checked against drawing or sample requirements.
Surface Inspection
Visual inspection confirms finish quality, burr removal, and assembly cleanliness.
Batch Documentation
Inspection reports and production traceability can be provided on request.
More in Rod End / Heim Joint
Request a Quote for This Product
Share your quantity, delivery timing, drawing reference, or any customization requirement. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]