Bore 0.7500 / 3/4-16 ThreadPCYFR12T PCYFL12T 0.7500 3/4-16 Chromoly Steel Female Rod End
PCYM-T PCYF-T Product Overview
PCYFR12T / PCYFL12T features a 0.7500″ bore (B) and 2.000″ body diameter (D). Overall body length (AF) is 3.375″, thread engagement (CF) measures 1.785″. Width (W) is 1.500″ and body thickness (T) is 0.651″. Approximate weight: 0.840 lbs.
Rated at 29,127 lb static radial load with ±54° ultra-high misalignment angle, this 2-piece female rod end with a 3/4-16 UNF 3A internal thread suits maximum-load suspension, truck steering, and extreme-duty assemblies requiring the widest misalignment range. The extra-wide misalignment range is achieved through a special high-misalignment 52100 bearing steel ball, precision ground and hard chrome plated.
PTFE liner is standard on all PCYM-T / PCYF-T models, providing maintenance-free, lubrication-free operation from first installation. Stud configuration available (add suffix S). Body is 4130 chromoly steel, heat treated and black oxide coated; ball is 52100 bearing steel, hard chrome plated.
PCYM-T PCYF-T Series — Full Size Range
All available sizes in the PCYM-T PCYF-T series. Can’t find your size? Contact us for custom dimensions.
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | AM LENGTH +.015 -.015 | N THREAD UNF 3A | CM LENGTH +.062 -.031 | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYMR6T | PCYML6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.375 | 46 | 11,050 | 0.14 |
| PCYMR7T | PCYML7T | 0.4375 | 1.312 | 1.000 | - | 2.438 | 7/16-20 | 1.500 | 58 | 14,449 | 0.22 |
| PCYMR8T | PCYML8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.625 | 60 | 16,240 | 0.33 |
| PCYMR8-10T | PCYML8-10T | 0.5000 | 1.750 | 1.250 | - | 2.875 | 5/8-18 | 1.750 | 65 | 24,158 | 0.44 |
| PCYMR10T | PCYML10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.750 | 48 | 21,219 | 0.51 |
| PCYMR10-12T | PCYML10-12T | 0.6250 | 2.000 | 1.375 | - | 3.375 | 3/4-16 | 2.000 | 64 | 30,290 | 0.68 |
| PCYMR12T | PCYML12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 2.000 | 54 | 29,127 | 0.79 |
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B | D | W | T | AF | N | CF | a° | STATIC | LBS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PCYFR6T | PCYFL6T | 0.3750 | 1.125 | 0.875 | 0.390 | 2.125 | 3/8-24 | 1.062 | 46 | 11,050 | 0.20 |
| PCYFR8T | PCYFL8T | 0.5000 | 1.500 | 1.250 | 0.470 | 2.625 | 1/2-20 | 1.375 | 60 | 16,240 | 0.43 |
| PCYFR10T | PCYFL10T | 0.6250 | 1.750 | 1.375 | 0.531 | 2.875 | 5/8-18 | 1.562 | 48 | 21,219 | 0.57 |
| PCYFR12T | PCYFL12T | 0.7500 | 2.000 | 1.500 | 0.651 | 3.375 | 3/4-16 | 1.785 | 54 | 29,127 | 0.84 |
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Where PCYM-T PCYF-T Rod Ends Are Used
More from the PCYM-T PCYF-T Series
Request a Quote for the PCYM-T PCYF-T Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]
PCYM-T PCYF-T Frequently Asked Questions
What is the difference between PCYM-T and PCYF-T rod ends?
PCYM-T parts are male-thread high-misalignment rod ends and PCYF-T parts are female-thread high-misalignment rod ends. Both belong to the same 2-piece PTFE-lined high-misalignment series.
What materials are used in the PCYM-T-PCYF-T series?
This series uses a hard-chrome-plated 52100 bearing steel high-misalignment ball and a 4130 chromoly steel body that is heat treated, black oxide coated, and PTFE lined.
What makes this series high misalignment?
The PCYM-T-PCYF-T series uses a high-misalignment ball and geometry that allow much larger articulation angles than standard rod ends, making it suitable for systems with aggressive movement or suspension travel.
What applications are best suited to PCYM-T-PCYF-T rod ends?
This series is well suited to long-travel suspension links, steering geometry correction, off-road race fabrication, and other linkage systems that need large articulation range in a compact package.
Are both male and female thread versions available in this series?
Yes. PCYM-T covers the male-thread versions and PCYF-T covers the female-thread versions, allowing the same high-misalignment design to be used across different linkage layouts.
Is this series intended for corrosion-focused stainless applications?
No. This is a chromoly black oxide high-misalignment series designed around articulation and performance packaging. Stainless series are better suited to corrosion-priority environments.