Ball Ø 22 / M14X1.5CSM14 is a compact metric ball joint with M14×1.5 thread at both ends and a 22 mm carbon steel ball stud. Overall length (L) is 45 mm; housing diameter (D) is 19 mm. Dimension L1 = 21.5 mm, l1 = 28.0 mm, l2 = 22 mm. Approximate weight: 220.9 g.
The CS series uses a carbon steel 1020 housing, a hardened carbon steel 1045 ball stud, and a spring-steel retaining clip. Surface treatment is silver or yellow zinc plating. An optional sealing cap is available when dust or splash protection is required. Suitable for steering linkages, ATV/UTV controls, agricultural adjustment levers, and compact industrial mechanisms that need metric-threaded ball-joint articulation.
Available with optional sealing cap (add ‘-CAP’ when ordering). Stainless steel version available with ‘S’ prefix (e.g., SCSM14). Left-hand thread version available by adding ‘LH’ suffix. Yellow zinc plating available on request.
All available sizes in the CS Series DIN 71802 Angled Ball Joint series. Can’t find your size? Contact us for custom dimensions.
| Part NO. | THREAD d1 | THREAD d2 | Ball Dia d1 | L +0.3 -0.3 | L1 +0.3 -0.3 | l1 +0.3 -0.3 | l2 +0.3 -0.3 | D | a° | APPROX WEIGHT (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| CSM5 | M5X0.8 | M5X0.8 | 8 | 22 | 10.2 | 10.2 | 9 | 8 | 36 | 15.2 |
| CSM6 | M6X1.0 | M6X1.0 | 10 | 25 | 11.5 | 12.5 | 11 | 10 | 36 | 25.2 |
| CSM8 | M8X1.25 | M8X1.25 | 13 | 30 | 14.0 | 16.5 | 13 | 13 | 36 | 53.1 |
| CSM10 | M10X1.5 | M10X1.5 | 16 | 35 | 15.5 | 20.0 | 16 | 16 | 36 | 103.8 |
| CSM12 | M12X1.75 | M12X1.75 | 16 | 35 | 15.5 | 20.0 | 16 | 16 | 36 | 103.8 |
| CSM14 | M14X1.5 | M14X1.5 | 22 | 45 | 21.5 | 28.0 | 22 | 19 | 36 | 220.9 |
| CSM14x2.0 | M14X2.0 | M14X2.0 | 22 | 45 | 21.5 | 28.0 | 22 | 19 | 36 | 220.9 |
| CSM16 | M16X1.75 | M16X1.75 | 22 | 45 | 21.5 | 28.0 | 22 | 19 | 36 | 220.9 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The CSM14 is a compact metric ball joint with M14X1.5 thread at both ends and a 22 mm carbon steel ball stud, suited to steering linkages, ATV/UTV controls, agricultural adjustment levers, and compact industrial mechanisms needing metric-threaded articulation.
Overall length (L) is 45 mm, housing diameter (D) is 19 mm, dimension L1 is 21.5 mm, l1 is 28.0 mm, and l2 is 22 mm. Approximate weight is 220.9 g.
The housing is Carbon Steel 1020, the ball stud is a hardened Carbon Steel 1045, and the retaining clip is Spring Steel. Standard surface treatment is silver or yellow zinc plated.
Yes. An optional sealing cap is available when dust or splash protection is required — add the '-CAP' suffix when ordering (e.g. CSM14-CAP).
Yes. A stainless steel version is available with an 'S' prefix (e.g. SCSM14), and a left-hand thread version is available by adding an 'LH' suffix. Yellow zinc plating is available on request in place of the standard finish.
Confirm thread hand (standard vs. LH), body material (carbon steel vs. stainless 'S' prefix), plating color, and whether the optional sealing cap ('-CAP') is needed, since the M14X1.5 thread and 22 mm ball are fixed for this part number.
