Rod-End Misalignment and Clearance
Spacers position a rod end between mounting tabs while adding clearance around the spherical ball and fastener. Select the spacer width, bore, and shoulder geometry to preserve the required angular travel.
related-product-inchRELATED PRODUCT
SCNS6 CNS6 Cone Spacer
Part No.: CNS6
· Thread-adjustment and fabrication hardware series
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
B 3/8 in.
C 0.083 in.
Cone spacer geometry for rod ends and spherical bearings
Stainless SCNS and zinc plated carbon steel CNS options
Compact spacer profile for width and articulation tuning
Multiple cone angles available by joint package size
SCNS Material
Stainless steel
CNS Material
Zinc plated carbon steel
Type
Cone spacers, standard spacers available
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
ROD END SPACERS SCNS / CNS Product Overview
SCNS6 / CNS6 is a 3/8″ bore cone spacer. OD (A) = 0.5″, cone depth (C) = 0.083″, outer flange OD (D) = 0.75″, flange width (E) = 0.312″. Cone angle: 25°.
SCNS (stainless steel) and CNS (zinc plated carbon steel) cone spacers are used with rod ends and spherical bearings to provide a tapered seating for pins or bolts passing through clevis-mounted assemblies. The conical face distributes load and allows slight angular misalignment between the pin and the bearing race. Used in steering, suspension, and linkage applications where clevis pins are employed.
Stainless: SCNS6. Carbon steel (zinc plated): CNS6. Standard flat spacers also available in the SCW/CW series. Sold individually; install in pairs for symmetrical assemblies.
Size Chart
ROD END SPACERS SCNS / CNS Series — Full Size Range
All available sizes in the ROD END SPACERS SCNS / CNS series. Can’t find your size? Contact us for custom dimensions.
| Stainless Steel | Carbon Steel | A +.000 -.001 | B +.005 -.005 | C +.003 -.000 | D +.005 -.005 | E +.005 -.005 | Q ANGLE a |
|---|---|---|---|---|---|---|---|
| SCNS5 | CNS5 | 0.412 | 5/16 | 0.083 | 0.625 | 0.312 | 22° |
| SCNS6 | CNS6 | 0.500 | 3/8 | 0.083 | 0.750 | 0.312 | 25° |
| SCNS7 | CNS7 | 0.562 | 7/16 | 0.100 | 0.750 | 0.375 | 16° |
| SCNS8 | CNS8 | 0.592 | 1/2 | 0.100 | 0.875 | 0.375 | 28° |
| SCNS10 | CNS10 | 0.750 | 5/8 | 0.100 | 1.000 | 0.375 | 28° |
| SCNS12 | CNS12 | 0.894 | 3/4 | 0.125 | 1.375 | 0.437 | 18° |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where ROD END SPACERS SCNS / CNS Are Used
Related Products
All Products →More from the ROD END SPACERS SCNS / CNS Series
Get a Quote
Request a Quote for the ROD END SPACERS SCNS / CNS Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
ROD END SPACERS SCNS / CNS Frequently Asked Questions
What is the SCNS6 / CNS6 cone spacer used for?
The SCNS6 / CNS6 is a 3/8" bore cone spacer used with rod ends and spherical bearings to provide a tapered seating for pins or bolts passing through clevis-mounted assemblies — the conical face distributes load and allows slight angular misalignment between the pin and the bearing race. It's used in steering, suspension, and linkage applications where clevis pins are employed.
What are the dimensions of the CNS6 cone spacer?
Bore (B) is 3/8", OD (A) is 0.500", cone depth (C) is 0.083", outer flange OD (D) is 0.750", and flange width (E) is 0.312". Cone angle is 25°.
What is the difference between SCNS6 and CNS6?
SCNS6 is the stainless steel version and CNS6 is the zinc-plated carbon steel version of the same 3/8" cone spacer — same dimensions and cone angle, different material for corrosion resistance versus cost.
How should the CNS6 cone spacer be installed?
The CNS6 is sold individually; install in pairs for symmetrical clevis-pin assemblies so the tapered faces seat evenly on both sides of the joint.
Is a flat (non-cone) spacer version available for the 3/8" bore size?
Yes. Standard flat spacers in the same 3/8" bore size are also available in the SCW/CW series, alongside this cone-style SCNS/CNS spacer.
What cone angle does the CNS6 use?
The CNS6 has a 25° cone angle, which is specific to this bore size in the SCNS/CNS lineup — confirm this angle matches your clevis and pin geometry before ordering.