Search by part number, series, material, application, or specification.
Press Enter to view all results Esc to close
B 1.5000 / D 2.7500SLB24H is a load-slot spherical plain bearing with a 1.5000″ bore (B) and 2.7500″ OD (D). Body width (W) = 1.375″, inner race width (T) = 1.094″. Ball diameter = 2.312″. Flat OD (O) = 1.860″. Approximate weight: 1.358 lb.
Rated at 135,950 lb static radial load with ±8.5° misalignment angle. The 52100 bearing steel ball is precision ground, heat treated, and hard chrome plated. The alloy steel race is heat treated and oil coated, with a reinforced nylon race and PTFE liner for self-lubricating operation. The load-slot design allows the ball and race to be assembled from the side, simplifying installation in confined or fixed-pin assemblies. Stainless steel options available for corrosive environments.
Stainless race + stainless ball: add ‘-SS’ suffix (e.g., SLB24H-SS). Stainless race + steel ball: add ‘-S’ suffix (e.g., SLB24H-S). Zinc plated race available on request. Standard COM(-T) series available without the load-slot feature.
All available sizes in the SLB Self-Lubricating Spherical Bearings series. Can’t find your size? Contact us for custom dimensions.
| SLB LOADER SLOT PART NUMBER | B DIA. +.0015 -.0005 | D DIA. +.0000 -.0007 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | O FLAT DIA. REF. | M CHAMFER REF. | BALL DIA. REF. | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|
| SLB8 | 0.5000 | 1.0000 | 0.500 | 0.390 | 0.640 | 0.032 | 0.781 | 9.5 | 13,257 | 0.060 |
| SLB10 | 0.6250 | 1.1875 | 0.625 | 0.500 | 0.780 | 0.032 | 0.968 | 8.5 | 21,280 | 0.100 |
| SLB12 | 0.7500 | 1.4375 | 0.750 | 0.593 | 0.920 | 0.044 | 1.187 | 9.0 | 31,920 | 0.190 |
| SLB14 | 0.8750 | 1.5625 | 0.875 | 0.703 | 0.980 | 0.044 | 1.312 | 9.5 | 41,960 | 0.263 |
| SLB16 | 1.0000 | 1.7500 | 1.000 | 0.797 | 1.118 | 0.044 | 1.500 | 10.0 | 55,200 | 0.386 |
| SLB16H | 1.0000 | 2.0000 | 1.000 | 0.781 | 1.360 | 0.032 | 1.687 | 9.0 | 70,820 | 0.553 |
| SLB20H | 1.2500 | 2.3750 | 1.187 | 0.937 | 1.610 | 0.032 | 2.000 | 8.5 | 100,730 | 0.895 |
| SLB24H | 1.5000 | 2.7500 | 1.375 | 1.094 | 1.860 | 0.032 | 2.312 | 8.5 | 135,950 | 1.358 |
| SLB32H | 2.0000 | 3.5000 | 1.750 | 1.375 | 2.360 | 0.044 | 2.937 | 8.5 | 217,060 | 2.650 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The SLB24H is a load-slot spherical plain bearing with a 1.5000" bore, designed so the ball and race can be assembled from the side — simplifying installation in confined or fixed-pin assemblies where a standard bearing can't be dropped in axially.
Bore (B) is 1.5000", OD (D) is 2.7500", body width (W) is 1.375", inner race width (T) is 1.094", ball diameter is 2.312", and flat OD (O) is 1.860", weighing approximately 1.358 lb.
The SLB24H is rated at 135,950 lb static radial load with ±8.5° misalignment angle.
The 52100 bearing steel ball is precision ground, heat treated, and hard chrome plated. The alloy steel race is heat treated and oil coated, with a reinforced nylon race and PTFE liner for self-lubricating operation.
The load-slot design allows the ball and race to be assembled from the side, simplifying installation in confined or fixed-pin assemblies. A reinforced nylon race with PTFE liner provides self-lubricating operation.
Stainless steel options available for corrosive environments. Add '-SS' for a stainless race with stainless ball (e.g., SLB24H-SS), or '-S' for a stainless race with a standard steel ball (e.g., SLB24H-S); zinc-plated race is also available on request. The standard COM(-T) series is available without the load-slot feature.
