Search by part number, series, material, application, or specification.
Press Enter to view all results Esc to close
Bore 0.3750 / 3/8-24 ThreadVFR6 / VFL6 features a 0.3750″ bore (B) and 1.000″ body diameter (D), with a 0.719″ precision-ground 52100 steel ball running in an oil-impregnated sintered bronze race. Overall body length (AF) is 1.625″, thread engagement (CF) measures 0.937″. Width (W) is 0.500″ and body thickness (T) is 0.406″. Approximate weight: 0.150 lbs.
Rated at 3,915 lb static radial load with ±12° misalignment angle, this 3-piece female rod end with a 3/8-24 UNF 3A internal thread suits general industrial linkages, suspension components, and control assemblies. The sintered bronze race is oil-impregnated during manufacture, providing continuous self-lubrication without external greasing — ideal for installations where periodic maintenance access is limited.
Available in right-hand (VFR6) and left-hand (VFL6) thread configurations. Grease fitting option available (add suffix Z, e.g. VFR6Z) for extended service intervals. Stud configuration also available (suffix S). Silver zinc plating available on request for enhanced corrosion protection. Body is carbon steel, heat treated and yellow zinc plated.
All available sizes in the VM VF Bronze-Race Carbon Steel Rod Ends series. Can’t find your size? Contact us for custom dimensions.
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B DIA. +.0025 -.0005 | D DIA. +.010 -.010 | W WIDTH +.005 -.005 | T WIDTH +.005 -.005 | BALL DIA. REF. | AM LENGTH +.015 -.015 | N THREAD UNF 3A | CM LENGTH +.062 -.031 | a° MIS. ANGLE REF. | STATIC RADIAL LOAD (LBS) | APPROX WEIGHT (LBS) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VMR3 | VML3 | 0.1900 | 0.625 | 0.312 | 0.250 | 0.437 | 1.250 | 10-32 | 0.750 | 13 | 1,169 | 0.03 |
| VMR4 | VML4 | 0.2500 | 0.750 | 0.375 | 0.281 | 0.500 | 1.562 | 1/4-28 | 1.000 | 16 | 2,158 | 0.04 |
| VMR5 | VML5 | 0.3125 | 0.875 | 0.437 | 0.344 | 0.625 | 1.875 | 5/16-24 | 1.250 | 12 | 2,784 | 0.07 |
| VMR6 | VML6 | 0.3750 | 1.000 | 0.500 | 0.406 | 0.719 | 1.938 | 3/8-24 | 1.250 | 12 | 3,915 | 0.11 |
| VMR7 | VML7 | 0.4375 | 1.125 | 0.562 | 0.437 | 0.812 | 2.125 | 7/16-20 | 1.375 | 14 | 4,218 | 0.16 |
| VMR8 | VML8 | 0.5000 | 1.312 | 0.625 | 0.500 | 0.937 | 2.438 | 1/2-20 | 1.500 | 12 | 6,660 | 0.25 |
| VMR10 | VML10 | 0.6250 | 1.500 | 0.750 | 0.562 | 1.125 | 2.625 | 5/8-18 | 1.625 | 16 | 7,364 | 0.38 |
| VMR12 | VML12 | 0.7500 | 1.750 | 0.875 | 0.687 | 1.312 | 2.875 | 3/4-16 | 1.750 | 14 | 11,518 | 0.60 |
| RIGHT HAND PART NO. | LEFT HAND PART NO. | B | D | W | T | BALL | AF | N | CF | a° | STATIC | LBS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VFR3 | VFL3 | 0.1900 | 0.625 | 0.312 | 0.250 | 0.437 | 1.062 | 10-32 | 0.562 | 13 | 1,531 | 0.04 |
| VFR4 | VFL4 | 0.2500 | 0.750 | 0.375 | 0.281 | 0.500 | 1.312 | 1/4-28 | 0.750 | 16 | 2,539 | 0.06 |
| VFR5 | VFL5 | 0.3125 | 0.875 | 0.437 | 0.344 | 0.625 | 1.375 | 5/16-24 | 0.750 | 12 | 3,133 | 0.09 |
| VFR6 | VFL6 | 0.3750 | 1.000 | 0.500 | 0.406 | 0.719 | 1.625 | 3/8-24 | 0.937 | 12 | 3,915 | 0.15 |
| VFR7 | VFL7 | 0.4375 | 1.125 | 0.562 | 0.437 | 0.812 | 1.812 | 7/16-20 | 1.062 | 14 | 4,218 | 0.2 |
| VFR8 | VFL8 | 0.5000 | 1.312 | 0.625 | 0.500 | 0.937 | 2.125 | 1/2-20 | 1.187 | 12 | 6,660 | 0.33 |
| VFR10 | VFL10 | 0.6250 | 1.500 | 0.750 | 0.562 | 1.125 | 2.500 | 5/8-18 | 1.500 | 16 | 7,364 | 0.48 |
| VFR12 | VFL12 | 0.7500 | 1.750 | 0.875 | 0.687 | 1.312 | 2.875 | 3/4-16 | 1.750 | 14 | 11,518 | 0.72 |
Material certifications verified. Composition confirmed by spectrometer before machining begins.
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Static and dynamic load tests run on representative samples from each production batch.
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Misalignment angle and torque measured to confirm liner performance meets specification.
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
The VFR6 / VFL6 is a 3-piece female rod end with a 0.3750" bore and 3/8-24 UNF 3A internal thread, built for general industrial linkages, suspension components, and control assemblies.
Bore (B) is 0.3750", body diameter (D) is 1.000", the ball is 0.719" in diameter, overall body length (AF) is 1.625", thread engagement (CF) is 0.937", width (W) is 0.500", body thickness (T) is 0.406", and approximate weight is 0.150 lbs.
The VFR6 / VFL6 is rated at 3,915 lb static radial load with up to ±12° of misalignment.
The 0.719" ball is 52100 bearing steel, precision ground, heat treated, and hard chrome plated, running in a sintered bronze race that's oil-impregnated for continuous self-lubrication without external greasing. The body is carbon steel, heat treated and yellow zinc plated; silver zinc plating is available on request for added corrosion protection.
VFR6 is the right-hand thread version and VFL6 is the left-hand thread version of the same female rod end — same size and load rating, opposite thread hand, typically paired for turnbuckle-style adjustable linkages or used individually for fixed installations.
SYZ offers a grease-fitting option (add suffix Z, e.g. VFR6Z) for extended service intervals, a stud configuration (suffix S), and silver zinc plating on request for enhanced corrosion protection — confirm which options you need when requesting a quote.
