Zinc Plated Carbon Steel Lower Ball Joint
Rod End Product Overview
Item: Zinc Plated Carbon Steel Lower Ball Joint
Material: Carbon Steel, Zinc Plated
Custom Service Process:Select Similar Product — Confirm MOQ — Send Inquiry — Send your Drawings or Samples — Customization
Select product (If your product is not on our website, select a similar product) — Confirm the quantity you need meet up with our MOQ — Send inquiry with your Drawings or Samples — We will reply to you and confrim details — Send details to our factory and start customization
Hot Selling Products
Rod End Series — Full Size Range
All available sizes in the Rod End series. Can’t find your size? Contact us for custom dimensions.
Size chart will appear here once configured for the Rod End series.
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Where Rod End Rod Ends Are Used
More from the Rod End Series
Request a Quote for the Rod End Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Request a Quote
Please submit the form or email [email protected]
Rod End Frequently Asked Questions
What is the difference between XM and XF rod ends in this series?
XM parts are male rod ends with an external shank thread, while XF parts are female rod ends with an internally threaded body. Both belong to the same XM-XF series and share the same core performance direction.
What industries commonly use the XM-XF series?
The XM-XF series is commonly used in off-road racing, agricultural equipment, industrial linkages, marine hardware, and other motion-control assemblies that need compact articulation and dependable load capacity.
Are both right-hand and left-hand thread versions available?
Yes. The XM-XF series can be supplied in right-hand or left-hand thread configurations depending on the part number and linkage design requirement.
Can I request custom materials or finishes for XM-XF products?
Yes. For OEM or repeat-order programs, SYZ can discuss custom body materials, plating, special packaging, and other production requirements based on your application.
How do I choose the correct bore and thread size?
Start from the required ball bore, thread size, and body style, then match them against the XM-XF size chart. If your assembly has special dimensional constraints, send the target dimensions to us for selection support.
Do all XM-XF rod ends use the same race material?
Not always. Some variants may use a race liner while others may differ by structure, so the exact build should be confirmed from the product spec or inquiry response for the target part number.
Can I order samples before placing a bulk order?
Yes. Sample support is available for qualification. Standard policy is free samples with freight handled separately unless otherwise agreed.
What is the usual production lead time for XM-XF orders?
Typical lead time is around 7 to 15 days depending on order quantity, stock condition, finishing requirements, and whether any custom packing or OEM marking is needed.